TheWolf

New shirts too! https://adamspolishes.com/collections/adams-polishes-apparel And a new dome sticker. https://adamspolishes.com/collections/adams-polishes-stickers/products/adams-polishes-3-dome-sticker

Don't miss out on the 25% discount! https://adamspolishes.com/

Nice work Chris! How did the cordless polisher compare to the corded Swirl Killer?

Rinseless Wash has polymers in it, and the residue could affect the behavior of the coating. If you do a rinseless wash, or a waterless wash with diluted Rinseless Wash, then I would go back and do a quick wipe-down with Ceramic Waterless Wash to remove any RW residue, and this will also give a little boost to the coating. Since you are not actually cleaning with the Ceramic Waterless Wash, you can use much less product for the final wipe-down.

Wheel Cleaner Gallon for $43.34, plus check the box for a 15% discount and its $33.59 before tax. https://www.amazon.com/dp/B006MYCH1I/ref=cm_sw_r_cp_apa_i_JLniDbHZ0484A

Wheel Cleaner 16oz for $11.69, plus check the box for a 15% discount and its $9.14 before tax. https://www.amazon.com/dp/B00BPGGSCW/ref=cm_sw_r_cp_apa_i_LFniDbX1G7A47

Last day on this sale, don't miss out on 20% off orders over $150. CLICK HERE TO SHOP

I didn't either, until a customer recently posted it on the Ford Raptor Forum!

Check out this guide: https://adamspolishes.com/how-to-clean-suede-interior

The Limited Edition Interior Detailer and Car Shampoo have been restocked. https://adamspolishes.com/shop/specials/sub-category-1.html

Apply the product and remove the haze only with very careful motions parallel to the edges of the vinyl. Do not apply or remove product by crossing the edge of the vinyl, or with circular motions. With most products, it won't look like there is any problem by not following this advice, but any product that gets built up along the edges of the vinyl will eventually turn white after a few days, and it is very difficult to remove. After a few years of not being careful enough with the vinyl lettering on the hood of my truck, I had to remove the vinyl because I could not stand seeing the residue built up along the edge.

"I want off, I want off, I want off!" - The Bead

Tried out the Mega Foam Shampoo today. It goes on THICK and has good hang time. Seemed adequately lubricating. Used 2oz in the Adam's Foam Cannon with the electric pressure washer delivering 2.1 gpm at 1900 psi. If you are on Instagram, I posted a video to @danwolf73

Do not use APC as a waterless strip product. This is a strong degreaser and the product instructions state to not allow it to dry on the paint, as it can etch some finishes. Use Surface Prep, the older Coating Prep, or make you own solution of 50% Isopropyl Alcohol with 50% distilled water, to strip clean paint.  Trying to combine cleaning and stripping into one step is not advisable. For waterless cleaning, you need the lubrication in Waterless Wash or Rinsless Wash, but this lubrication is provided by polymers, which is going to remain on the paint. The follow-up step would be to use Prep or IPA solution to remove these lubricants and any old wax or sealant. Trying to do both at once and the two products are working against each other. The Prep or IPA will immediately dilute and break down the polymers making it less safe to clean (ie reduced lubrication), and the polymers will still be left on the paint, so the surface is not truly stripped.

Do not use APC as a waterless strip product. This is a strong degreaser and the product instructions state to not allow it to dry on the paint, as it can etch some finishes. Use Surface Prep, the older Coating Prep, or make you own solution of 50% Isopropyl Alcohol with 50% distilled water, to strip clean paint. Trying to combine cleaning and stripping into one step is not advisable. For waterless cleaning, you need the lubrication in Waterless Wash or Rinsless Wash, but this lubrication is provided by polymers, which is going to remain on the paint. The follow-up step would be to use Prep or IPA solution to remove these lubricants and any old wax or sealant. Trying to do both at once and the two products are working against each other. The Prep or IPA will immediately dilute and break down the polymers making it less safe to clean (ie reduced lubrication), and the polymers will still be left on the paint, so the surface is not truly stripped.

This isn't just a sale, its a SAVINGS EVENT!!! 15% off on orders up to $150, and 20% off on orders over $150 No discount code needed, discount is automatically applied in the cart. Plus, get free shipping on orders over $85 (total after discount, continental US only) CLICK HERE TO SHOP

Good point! Grip tape is a good thing when the stool would be wet and soapy.

I can't wait to try this new cordless polisher. Nearly all my power tools are cordless, as I have been replacing all the corded ones. Now it seems awkward to have a cord on a tool. https://adamspolishes.com/shop/specials/sub-category-1/adam-s-cordless-swirl-killer-15mm-polisher.html

Constructive feedback is always appreciated. However, there have been past instances were some members have been overly negative in a majority of their posts, including criticising other members. This type of behavior is not allowed.

I understand the frustration, as many of us are used to 2-day shipping from Amazon, which now has 1-day shipping on many items. Order backlog during most sale events can take a few days to process for standard or free shipping options, and the free shipping option usually means Smartpost, which adds another few days for the USPS to handle the final delivery. I have found that having a gallon refill in the order usually results in standard ground shipping and not Smartpost.

I have similar work platforms, and use them for lots of tasks. https://adamspolishes.com/shop/specials/sub-category-1/adam-s-new-standard-step-stool.html

Yes, and it works great. On Saturday, the truck was covered in pollen, so I did a touchless wash by pressure washing with DI water, and then let it drip dry.

Bummer! That would be frustrating. Hopefully Customer Service will ship the correct model right away, and not make you wait for the returned polisher.

Happy Father's Day!

Yes, you can use Ceramic Paint Coating on matte vinyl, but it will make the appearance slightly darker with the possibility of adding some small level of shine.