RayS

Dreaming zombie

6 hours ago, Marshall said:

how can you pour it in correctly and not make a mess?

Google is probably your best friend for this solution just search for:  Gallon Pump Dispenser

You'll find many options and they are rather inexpensive, especially if you pick up a pack of 4 or larger.  Each one should last the life of the gallon and most of the time you can go through two or three gallons before they need replacing.

Note:  Don't move them between gallons, there are always chemicals left in the pump so once it goes in a gallon that is the only product it should be used for.

Box lunch

Hi John,
My wife managed to ding her wheel and tire on her garage queen a while ago.  The result was a new wheel and multiple hours of my time to get the tire looking acceptable again.  According to how deep the scratches are in the tire you may be able to cover them with the chemicals or repair them with some #0000 steel wool.   It really comes down to the compound of the tires.   For the #0000 steel wool, I highly recommend trying a spot on the inside before going after the outside.

I found it interesting that it can be used with the Foam Cannon vs a drying aid which I think of as a mist on and wipe off.   I would have liked to have given this a try at the beginning of pollen season since it gets so bad here and weekly rinses are required. 

• Use with Foam Cannon & Pressure Washer or with Foam Gun & Hose

Lines crossed

Welcome to the Forum.

On 3/28/2024 at 8:48 AM, rrmccabe said:

so switching to the 1:1 orifice really helped

The 1.1 orifice arrive and I had to test it out and the results were rather impressive.  It does make me wonder why it is an included option, especially how inexpensive it was and I did buy in bulk.   I appreciate the note in the forum and I'm sure it help others.

@TR6speed Hi Jack,  I'll be back in Dade City in the next few weeks and have some of the 64 oz bottles if you are interested in meeting up for lunch and a trade. 

Change tires

Thanks Rich for the note about the 1.1mm nozzle and I'll need to seriously consider adding it to my next order.   As for the rinse, I've used the pressure washer, many different nozzles for the hose and nothing has compared to the Fire Hose nozzle.  Now if I could just keep it in my area instead of being on the wife's hose for her plants it would be nice.  

The story reminds me of the Black Roush Mustang that I did a few years ago - maybe it has something to do with the Black paint put on Mustangs.  While I also initially found the old white polish easier to work with, a small change in my routine got the results back to what I expected and all it took was adding a bit more of the the Original Pink Detail Spay to the pad.  I never use any other lube other than the Pink Detail Spray which I still attribute to improving my overall detailing capabilities.

My thought on the Black used for the Mustang's is that I did not have the same problem on Red Mustangs or other Black Ford's.

Flow diagram

I have the older Adam's brushes and have used them for years on my Chevy and GMC wheels and tires.  The brushed have held up very well and the wheels continue to loo great.  I have been know to use them on the Mustang and no harm has come to the brushes or Mustang either.

While I don’t track my usage of the Foam Gun vs Foam Cannon, I have little doubt that I use the Foam Gun 10 or more times for each time I use the Foam Cannon.   For large vehicles, very dirty vehicles or when doing multiple in a day, then I tend to go for the Pressure washer and Foam Cannon, otherwise the hose and Foam Gun is plenty.

I rarely do Rinseless washes and when I do, I go through a lot of wash pads and microfibers.   Then again when I do a waterless wash, even on the wife’s garage queen, I go through multiple waterless towels and microfibers.  I don’t hesitate to change wash pads or towels when doing anything with the vehicles.

I have washed Graphene coated vehicles with regular shampoo, ultra and mega foam.   They all work well on Graphene vehicles if you follow up with Graphene CS3 or Graphene Detail Spray as a drying agent.   When using Graphene Shampoo, unless in the direct sun, there is generally no need for a drying agent if you blow dry.

I've done multiple campers and motorhomes of all ages, sizes and conditions, the most recent was triple slide out that was 36' long and had sat in the Florida sun for a few years.   Getting them clean is the first challenge and most of time you'll need some black streak remover which you can pick up an any camping sales and service department.  

My preference is one soft brissle truck brush for cleaning the surface and of course the foam cannon works wonders to get the suds on it.  After it has been washed and is looking good, go over it with Guard and Gloss if it is White, otherwise wash it again using Wash & Wash.  Here's a link to the last one that I've done.  

@chops1sc Do you have anything to add for doing campers?

Watch maker

If there is real high humidity and I use the foam cannon on the truck with Graphene Shampoo it tends to run off the sides quickly.  The plus side is that you can see the road grime come off at the same time, so it makes it easy to get the truck washed.  

Hi Rich,
The one thing to keep in mind is that the volume of foam is affected by which shampoo you are using, Mega Foam (most) vs Ultra Shampoo (good) vs Graphene Shampoo (least) all give different volumes of Foam.   Also you water hardness or PH level can affect the volume of foam.   I'm not sure which size oriface I am using and it is in my external garage so I'm not going a looking tonight.  I due use the electrict pressure washer and actually prefer it over the gas, which I found to be too powerful at times.  I have not had any moulding, badges or even registration decals damaged by the electric, but did with the gas one.

23 hours ago, Marshall said:

. Didn't you make a post on here about using it on your camper? With good results?

Sure did and it works very well on campers, motorhomes and vinyl fences.  

Welcome to the Forum Nelson.

Hi Marshall,

The Wash & Wax works great on the garage door if it is fiberglass or aluminum.  It makes it easy to go over and really reduces the amount of dust and dirt that clings to it.  I try to do mine about 3 times a year, end of winter, after pollen season and late fall.  

Welcome to the Forum Matt.

My wife and I made a quick trip to Wisconsin and it gave my brother-in-law an opportunity to show me his new Wash Bay.  Let's just say that it far exceeded anything I was expecting to see and it was not the most impressive thing that I saw that day.  

The wash bay has a heated floor, the entire building is insulated, great lighting and the two black items in the ceilling are just 2 of the 4 in the building that are powered vents.   On the back wall, are the two pressure washers, one is connected to the soap dispenser and the other is clean water.   The entire system uses softened water and I am pretty sure that every piece of equipment he has will fit in there, height, width and length wise, just not all at the same time.

What I don't understand is why Mary just looked at me told me No.  I didn't even ask her a question...

Block grant