Yo-Yo Ma's Cousin

Yes it takes some thought, but Adam's has truly come up with systems to make it easier for everyday people to acheive great shine, and protection. I would highly recommend the Ceramic Spray Coating. It's a relatively new product (first formula came out about a year ago), so there's not a ton of information out there on its longevity. But I have been doing a test of my own, and I think what Adam's claims for longevity is accurate. I coated my vehicle with Ceramic Spray Coating (the first formula) and they claimed 6-8 months. My vehicle is outside 24/7, and I washed it about every week to every two weeks. I can say that it lasted probably a little over the 8 month mark. For that reason, I trust their claims of longevity. It's also pretty easy to apply, just make sure you take the proper steps to prepare the surface which you mostly have already planned to do. Strip wash and clay are the big ones. If I may recommend using Iron Remover prior to claying, that would remove many contaminants that your clay won't be able to reach, also it will reduce the risk of marring with the clay since there would be less contamination. Then Polish to your desired finish. Once you finish polishing, use Surface prep to remove any oils or really anything that may have been left over from any of the previous steps. This will help to acheive your paint/clearcoat to be bare. It's important to have naked paint to allow the Coating to bond properly to the paint (if there's wax or sealant or polishing residue or contamination, the coating will be bonding to those things as opposed to the paint.) Anyway, I highly recommend it, it will giv eyou great protection, but it will also look amazing!

Hi Jeff, Always an excited time to try something new! With your camaro being outside 24/7 my suggestion would be to go with Ceramic Spray Coating. It's really an incredible product that will give you more robust protection than the paint sealant and/or americana especially for something that is outdoors 24/7. In terms of polishing, every paint is different and unique. Always do a test spot first and start by using the least aggressive method. Since it seems you have Revive Hand Polish, that's where I always start. If you feel like you need something with more cut than the Revive Hand Polish, move up to the white Polish, and reassess. If you like your results then stop there and use that method to correct your paint. If you feel like your defects are deeper , then move to the blue Compound.

Welcome Chris! I also am from Georgia. About an 45 North of Atlanta. Excited to see pictures of that truck!

Another version is out now. @Pugsly14 not sure what the differences are here. Excited to see what these are.

Good question. I thought the same thing in regards to Ceramic WW.. To me it seems like CS3 is doing the same thing. Unless they added abrasives in there to get the "shine" part, but I don't think they would do that. I'm interested in hearing the update/difference And the Ceramic Spray Coating is now in a new bottle. I wonder if we're moving away from the Ceramic Line branding?

That to me looks like it needs to be polished. I think I've heard around the forum that some people use 0000grade steel wool and APC to try and attach some of the waterspots on the glass. But I can't speak to that process. I would use a glass polish by hand. and for the B pillars, I would use Polish with the white pad and a swirl killer.

Hello, Michael, Welcome!

Nice Looking Cars! I tried to give you a bunch of information for you to use. Please feel free to take or leave whatever you want, and youtube is your friend here. Adam's has a bunch of videos on youtube and on their site which are very helpful. Below is a pretty typical process for me when doing a full detail. This was based on a write up I did previously and I have added and subtracted lessons learned. Also some products have changed or come out so I tried to adjust the write up to reflect my updated process. PLEASE FEEL FREE TO ASK ANY QUESTIONS, WE'RE HAPPY TO HELP!! Exterior Washing, Polishing and Protecting: 1. Tires, Wheels, Wheel Wells, and Exhaust Tips - I always start with this step so as to not put water on paint. If I don't put water on the paint, then the water won't dry and it reduces the chances of water spots. I go one wheel at a time rinsing my tools in between. I make sure to have all my tools and chemicals prepared before putting water on the vehicle. What I mean by that is I have a bucket full of water and a little bit of CS, and I put all of my tools in the bucket. I start by spraying water all over the wheel, tire, and wheel well. Then spray some diluted APC into the wheel wells (I use APC because the majority of my wheel wells are carpet not rubber or plastic), then I take my Fender Brush (one of my favorites) and I brush the entirety of the wheel well. Then I rinse the wheel well. I follow that by spraying TRC or WTC onto the tire face and tread block, and use a Tire Brush to clean. In this step, the tires start to turn orange/brown which shows that the tires are dirty. I repeat this step until the chemical no longer turns brown but appears white. WTC is a very powerful cleaner safe for most factory wheels and very good on tires. However, I try to limit my WTC use because it's pretty heavy duty. For Wheels, I spray WC into the wheel barrel, rotors, and wheel face. You'll see the spray starting to turn red/purple, this means the chemical is reacting with and breaking down the iron/metallic particles that contaminate the wheel from brake dust and other grime from the road. I use a wheel brush to agitate the chemical, I actually like to use the Lug Nut brush to agitate the rotors and get in the lug nuts, and I also think it's a good option to use for the face of the wheel - otherwise the Red Wheel Brush is much bigger and makes cleaning the face of the wheels much much quicker. Then I would either use a wheel woolie or a barrel brush to get the wheel barrel and the back of the spokes. Then I would make sure to rinse the tire, wheel, and wheel wells thoroughly. and to avoid scratching the wheels, I try to rinse my tools after I use them, before I put them back in the bucket. Then I repeat for each wheel. For the exhaust tips, I basically just spray APC into the exhaust and use the wheel woolie or barrel brush to agitate, then rinse it all out. Chemicals used Wheel Cleaner (WC) Wheel and Tire Cleaner (WTC) - Seems more powerful than TRC, leaves tires fully stripped from all dirt and protection, but not always necessary to use so much cleaning power. Tire and Rubber Cleaner (TRC) All Purpose Cleaner, Diluted 1:1 with water (APC) Car Shampoo (CS) Tools used Tire Brush Fender Brush Wheel Woolie or Wheel Barrel Brush Lug Nut Brush Red Wheel Brush Here's Adams Process: ' 2. Wash Car with Strip Wash - This step is to not only clean the vehicle exterior, the strip wash is also trying to break down any protection (wax, sealant, etc.) you have on your vehicle. This can sound like a bad thing, but just keep in mind, later in this process we will be adding protection back to the paint, and likely a much better protection. We want to remove any existing protection, because we want the paint to be "naked." This will allow whatever protection chosen to be applied directly onto the paint/clear coat, as opposed to being applied to remnants of another wax or sealant. Start by having everything prepared before putting any water on the paint, once again we want to reduce the chance of water spots. Preferably you would use a two bucket wash method, in addition I love to use a pressure washer and foam cannon. If using a pressure washer and foam cannon, put about 2-3 oz of strip wash and 1 oz of Mega Foam in the foam cannon bottle, and I like to use 2-3oz of APC as well, I have seen in the past how APC is such a good degreaser that it will break down sealants and waxes. The problem there is if it dries on the paint, it can cause damage. So I was very careful about using APC. I start by rinsing the vehicle first, with only water, them immediately (since I am prepared) I attach my foam cannon and cover the vehicle in the strip wash/APC solution. I let that dwell for maybe 2 minutes. If you're not using a foam cannon you can start here by having two buckets filled with water and grit guards. One bucket has only clean water and a grit guard, the other has your soap solution of 3-4 oz of strip wash, and here I also like to add 2-3 oz of APC again. My wash mitt(s) go in the soap solution until after I have initially rinsed the vehicle. Once I have rinsed I grab my wash mitt and go from the top of the vehicle to the bottom. I am always aware of what's on my mitt, and if I picked up dirt or sticks or whatever. I make sure to get it off by either picking it out, using the pressure washer to clean it off, and putting my mitt in the bucket with only water and rubbing against the grit guard to clean the mitt before dunking back into the soap bucket. Try to keep the vehicle wet and lubricated by squeezing your mitt to release water/soap, until you finish cleaning the vehicle, and then immediately rinse thoroughly. If you need to take a break or if you aren't prepared for step 3, I would dry. (I wasn't prepared so I dried) if you have the option to dry with air, that's a good option, if not use a microfiber towel with no drying aid, meaning don't use Detail Spray or anything just use the towel. If you can go straight into step 3, do that you will dry the vehicle after that! Chemicals used Strip Wash All Purpose Cleaner (APC) Mega Foam Tools used 2 Buckets Grit Guards Wash Mitt or Sponge, etc Microfiber Drying Towel Here's a video explaining the Two Bucket Wash Method: 3. Chemical and Clay Decontamination- Every vehicle has contamination on it, even new ones. In this step you will be removing contamination that has been stuck in the clear coat. This step can look very different depending on who you talk to. Some people like to do this step during the wash, I'm not sure if there's a "right way", but this is one way to do it - by following the wash and dry: If you choose to go with a Ceramic Protection. This step is essential in the preparation for protection. Ceramic Products bond directly to your paint, but by leaving contamination on your paint, you're impeding the ceramic protection form bonding. Even if you're not going the ceramics route, this is a still a great step to include in your process to truly clean and decontaminate your vehicle. I start by spraying down the vehicle (depending on the weather and if you're doing this indoor or out door you may want to go panel by panel) with IR (or you can use a diluted WC), This acts just like WC in that it's reaction with iron and metallic contamination turns red/purple. It may be hard to see on black. If you're using on a dark vehicle, you can see evidence of it dripping purple on the ground below... Anyways spray the vehicle (try to keep it away from plastic and rubber), then let it sit for 2-4 minutes. Then rinse it all off. Then I used a clay lube and used a clay bar to remove other contaminants that are stuck in the clear coat. I normally use very careful, very light pressure (since clay is an abrasive) and never ever do it dry. Always make sure the surface is lubricated. Do this for all the wheels, paint, glass, chrome, or anything that shines, I don't use it for my trim pieces or headlights. You will see and feel your clay bar start to pick up little specs of contamination. Periodically keep an eye on how much contamination is on the clay bar, and you may need to bend/reshape the clay in order to get a clean surface before continuing. Important note: you never want to drop this on the ground. It will pick up rocks and stuff that can drag some nice scratches in your paint. That goes for microfiber towels and wash mitts too. They love to grab stuff so be careful never to put them on the ground. I like to rinse and dry the vehicle once I'm done with the clay, others don't think its a necessary step. Note: Clay is an abrasive, so use gently and carefully.. Make sure the surface is lubricated and you will be fine. You will notice a difference in the slickness of your paint.Try the baggy test as Adam does in the video below. Chemicals used Iron Remover (IR) Clay Lube (Diluted Rinseless Wash or Detail Spray) Tools Used Clay Bar of Choice (I like Visco Elastic Clay and Clay Mitt. The most mild clay would be the Fine Clay Bar) 4. Polishing- So, to answer your question in short yes, with paint correction you are using abrasives to remove or cut away at the clear coat - or in your case possibly single stage paint which will remove scratches and oxidation and will reveal a new layer of paint. This is probably the most effective and true way to achieve shine. You can add protection on top of corrected paint which will also enhance the shine. If I may say so, I have had great experience with Adams Revive Hand Polish (AMAZON) and a Blue Hex Grip Applicator (I think they are sold out on the site and possibly replacing with an upgraded formula, time will tell - If you need it sooner, I placed the Amazon link to the product above. Or you can ask around and authorized dealers may have it). I mention this one because it makes a difference even when you think your paint is perfect. Somehow it takes your shine to the next level. About the product: It's a very minor abrasive, the least abrasive polish that Adams carries, and it is also acts as a paint cleaner to use prior to applying protection. Since the abrasive is minimal and you're meant to use it by hand, the risk of ruining your paint by burning through it is almost non-existent. However, if you have the ability and resources to use a machine, whether Adams Swirl Killer, Porter Cable, or any Dual Action Polisher, They will make much quicker work of bringing shine to your paint. Pair with a White Pad and the White Polish for a the least abrasive combination for machines. If you find that your paint defects are deeper, move on something more abrasive like a Blue Pad and Compound. Get indoors if you can at this point. This step is important to get your paint as perfect as possible. This is highly recommended. Once you apply the protection, any defects your paint may have will now be sealed under wax/sealant/coating. My vehicle was relatively new, and I didn't have many defects to my paint, so I skipped the polishing step. Looking back, I would have done a polish even if just a RHP. Polishing will make a difference. Although I didn't do it, I would recommend you at least do a polish with the polish with the white pad at this step. RHP with a blue hex grip pad (or white pad if using a machine) would be the last thing I would do before moving on. The polishing step is pretty heavily subjective depending on your preferences and your specific paint, so please feel free to ask me any questions you have about this, and I can try to answer them or point you to some help. But since I don't know the specifics, it's hard for me to direct you on here. Looking back, I would have done a polish even if just a RHP. Polishing will make a difference. Although I didn't do it, I would recommend you at least do a polish with the finishing polish with the white pad at this step. Also, The OSP with the One Step Pads look awesome and I'm excited to try them out. RHP with a blue hex grip pad (or white pad if using a machine), and remove with a microfiber towel, would be the last thing I would do before moving on. . Important note: When attempting paint correction, always do a test section around 2' x 2'. Start with the least abrasive and move to more abrasive as you go until you get the results that you're looking for. Paint Correction is a learning process, and is different for every paint. Each paint reacts differently to abrasives so it's important to see what your paint needs by doing a test section and re assessing your results throughout the process. I will post the levels of aggression below. Also note that Adams has a color coordinated system to make it easier for the us regular people to get good results when machine polishing. But don't be afraid to mix and match Pads and Liquids to find a good combination for what your paint needs. Pro Tip from @falcaineer : Dress your rubber and plastic pieces with VRT prior to polishing. If Polish gets on those pieces, it tends to leave ugly white marks. So applying a dressing will protect the pieces and make them easier to clean up if some polish gets on them. Tools Polisher (if you don't have one, it looks like Adams in the future may be introducing a rental program for polishers) Blue hex grip pad Single-soft Microfiber Towel, or Double-soft Microfiber Towel Machine Polishing Pads Least Aggressive - - - - - - - - - -- - - - - - -- - - - - - - - - - -- - - - - - - - - - - - - - - - - - - -- - > Most Aggressive White Foam Pad - - - - - - - - - - - - - -- - Blue Foam Pad - - - - - - - - - -- - - - -- - - Microfiber Pad Polishing Liquids Least Aggressive - - - - - - - - - -- - - - - - -- - - - - - - - -- - - -- - - - - -- - - - - - - - -- - - - -- - > Most Aggressive Revive Hand Polish - - - - Polish (white) - - - -- - One Step (gray/purple) - - - - Compound (blue) 5. Surface Prep- This is crucial to the process for Ceramic Coatings to fully clean the surface and remove an polishing oils or leftover wax that may be lingering. Use Adam's SP or a solution of Isopropyl Alcohol to spray down the paint and wipe with a Single-soft Microfiber Towel, or if you prefer, spray on the towel and wipe the surface. Do this for the glass and all the paint and the lights, and chrome and wheels. On the texturized plastic and rubber trim pieces, I would use TRC with a Microfiber Utility Towel to clean those pieces. After you have cleaned the oxidation off your rubber and plastic with TRC, follow up with SP and remove anything that's left prior to applying the Coating. Chemicals used Surface Prep (SP) or IPA solution Tire and Rubber Cleaner (TRC) Tools used Single-soft Microfiber Towel Microfiber Utility Towel 5. Protection You mention Ceramic Paste Wax, that is great stand alone protection. My favorite type of protection would be a ceramic coating. That way you can ensure that your paint will remain protected for many years (new UV Ceramic Paint Coating is stated to last 5 years, The new UV ceramic spray coating is stated to last 1 year). If you take the time to do a coating on each vehicle, it will just be a one time coating until you need to recoat in years, depending on which you choose.... The Ceramic Paint Coating is made for Paint and Trim and Metal. The Ceramic Spray Coating can be used on pretty much any exterior surface and some interior surfaces (Paint, Trim, Metal, Glass, Matte Finishes, Carbon Fiber, Rubber Floor Mats...). I love the Ceramic Spray Coating. If you choose to go with a full coating, then you can still use the Ceramic Paste Wax as a maintenance every 3-6 months or however often you please. Other great products for maintaining ceramic coatings are Ceramic Waterless Wash (Basically use it as a quick detailer, Spray and wipe to get light dust, fingerprints, etc. off.) Wash+Coat (A shampoo car to use in a foam cannon or in a bucket wash, infused with ingredient to help maintain your ceramic protection.) and Ceramic Boost (basically a spray and wipe product that will provide the best build up for your ceramic coating). But for this step, just follow the steps on the package for whichever protection you choose. Also let us know on here so we can better guide you if you need it. We Love to help! And you're done! --------------------------------------------------------------------------------------------------------------- Like I said take or leave all this info. The important part is to find a process that works for you. There's a big initial investment of time and money especially if you're just starting off, but I found that really enjoy my time detailing my vehicle and others' vehicles. It's therapeutic and Adam's products really enhance the process for me. And once you get those tools and towels, those will last you a while with proper care, so the majority of things you'll need in the future are refills or the occasional new chemical you want to try. Speaking of care... After I finish using a towel, I immediately throw it in a bucket full of water and I'll try to have some APC in the bucket or some detergent if handy. If not, car shampoo will do. But reason for that is to start breaking down whatever the towel may have picked up. If a towel is especially dirty like when I rinseless wash or waterless wash, my towels get real dirty. I put them in a bucket of water and once I'm ready (normally just later in the day, I don't like to leave towels for more than a day) I will spray the dirty towels down with APC and Rinse them with High pressure, whether I have my pressure washer out or I can just use my outdoor spigot, which has a good bit of pressure out of the wall. I let that loosen the dirt, then I take them to the Washing Machine. Also, if I use any SiO2 product, I immediately put those in a bucket of water because even if a product has a low level of SiO2 like the Wash+Coat, Wash and Wax, Ceramic Waterless Wash, and Ceramic Boost, that SiO2 can dry if you give it enough time. So I put those in water and wash those towels as soon as I possibly can. I wash them in Cold Cold water, Adam's has their own detergent which is GREAT. Microfiber Revitalizer. And I add an extra rinse cycle. I dry like in the dryer using Low Heat or No Heat. I never ever mix my microfibers with cotton or really anything else, I normally have enough to wash a small load after a wash. Here's a thread for Microfiber Care:

Interior: I've been using Leather and Interior cleaner for a while on plastics and vinyl works great!. My favorite interior cleaner for the heavier cleaning jobs would have to be All Purpose Interior Cleaning Gel. Both of the previous cleaners mentioned are dilutable, and I like to dilute my All Purpose Interior Cleaning Gel. It does an awesome job at getting gunk off of surfaces. Leather Conditioner will also work on Vinyl and Plastic to provide some protection from the sun, I use it about once every quarter or so. Interior Detailer is an awesome maintenance product for the time in between. It has a little cleaning power adds a little protection, but leaves everything looking like new! (They just came out with anti-microbial Interior Detailer - comes in four scents. just got mine in the mail, excited to try it out!) Vacuum all the floors and under the seats, and if you need to, use Carpet and Upholstery Cleaner for any stains you may have on cloth seats or carpets. For things on carpet and upholstery isn't able to tackle, You'll probably need to invest in a steamer. Here's a video of Adam using the Leather and Interior Cleaner on most parts of the interior (and demo'ing other products) : Exterior: There are many different processes you can use for the exterior it would be dependent on what your goal is for each detail. Have the vehicles been protected with Sealant, Wax, or Coating? Which one? How long ago? Different products go with different types of protection. Do you live in a cold climate? It might be worth looking into Rinseless Wash. If not, you can't go wrong with Car Shampoo. Does the paint need correcting? If so you'll need to look into a decontamination stage prior to correcting.

Very nice does it fit in there okay?

Looking good! What are you using to get the door handles polished?

Good question. I am not sure about the non UV version. I guess now that I think about it, I haven't seen it for sale since the UV version came out. And I used the UV version quickly on my brother's windshield during day light. The flash (rainbowing) was very clearly visible. I did not use the UV flashlight.

Great advice and great write up!

I have been thinking about trying out some new backing plate sizes. Does anybody know if the 3" Backing Plate that Adam's Sells will fit onto a Porter Cable? I'm having trouble locating the thread sizes for the backing plates.

Great idea, Ray. Whenever I see somebody with questions about products -Whether on Instagram or Facebook- I’ve been successful in helping that person find an answer by sharing a link to a related forum thread. But I agree those people don’t seem to know that The forum and all its knowledge was available in the first place.

Yessir, the backing plate comes installed on the machine. Adam's sells extras just incase something goes wrong with the one on the machine. Yes, the machine is great, it's comfortable and has some power to it. If I may say so, I would recommend keeping your old Port Cable and put a smaller backing plate on it to use it with smaller pads as a mini polisher. Just want to let you know that your old tool can still even though you upgraded.

Hi Jack, If you're gonna get a Swirl Killer I would recommend going for a mystery box seeing as it would be the same price, and usually they will pack it with some pads/polishes, although that is not guaranteed. Here's the link, it's kinda hidden on the site: https://adamspolishes.com/collections/adams-polishes-limited-edition-products/products/adam-s-199-99-random-mystery-box-limited or if you want the swirl killer pro mystery box: https://adamspolishes.com/collections/adams-polishes-limited-edition-products/products/adams-299-99-sk-pro-15mm-polisher-mystery-box They do make a One Step pad, which is meant to be used with the One step polish, but really the pad that you will need will be dependent on your paint. If your paint is softer, maybe try pairing the One step polish with a white pad. It will take some playing around with to get the right combination. Adam's recommends the One Step Pad with the One Step Polish though.. Heres a link to that: https://adamspolishes.com/products/adams-one-step-pad Excited for you!!

Nice write up!

Hi VT welcome to the forum. You came to the right place to learn. it may be helpful to understand what kind of protection is right for you. See the thread below: mu favorite protection is probably a ceramic coating. It’s very durable and lasts a long time. It can be confusing for sure but to give you a quick typical process here are some steps 1. clean wheels and tires, and if so desired, clean exhaust tips (chemicals which may fit into this category: wheel cleaner, tire and rubber cleaner, wheel and tire cleaner, eco wheel cleaner, all purpose cleaner, eco all purpose cleaner) 2. wash whole car thoroughly with two bucket method (think about using strip wash and/or car shampoo) 3. decontaminate (here’s where you use a clay bar or clay mit on all paint and glass, and a chemical that may help prior to claying is Iron Remover) 4. Polish (use swirl killer system with one step, Polish, or compound liquids and associated pads to remove swirls, scratches, water spots, hazing, etc on your paint) 5. Protect (use selected protection: wax, sealant, or ceramic coating)

I have been wanting to sell a new, unopened Adam's Microfiber blanket from this year. It already sold on ebay, but I cancelled the order due to no payment. Wanted to give any forum members the chance before I relisted it on ebay.

Welcome! I paased through Charlotte the other day! Like Chris said, let’s see some pics of your ride!

They offer the pumpkin spice in gallon and Although I agree, I enjoy a lot of limited scents, I don’t think they could be considered limited if they had loads of them.

Hey man I would love to take that leather conditioner off your hands

Ah yes, I'm familiar with the Diavolo. very cool. And yes, the Mighty Mini is what I pictured. I hope to one day get my hands on the SK Micro and try that baby out.

Alright good to know! That's funny! People are pretty confused when I bring out my gauge as well. Just being thorough! Maybe we're just obsessed on here, I don't mind accepting that as truth. Thanks for your responses, Michael!