Jump to content
Customer Service 866.965.0400
  • 0

FAQ - "I let soap dry on my paint just like the video..."


Team Adam's

Question

This will be the first in a series of FAQ threads where I'll open up a discussion on a common concern or problem people face when detailing.

 

The last few weeks there has been a lot of emails, PM's, and calls regarding wash techniques probably due in large to the fact we're starting to get nice warm weather in many parts of the world and people are getting their rides ready for shows, cruises, or just driving around and looking good!

 

So the common concern usually comes to me something like this.

 

"I washed my car today and the soap dried on the paint. Its about 89* out and my black paint was very hot. When I went to dry the car the soap didn't come off easily. I did it exactly like the video, why is it hard to remove the soap? Is this normal?"

 

The first thing to understand is that this is very much a case of "Just becasue you can, doesn't mean you should". The soap is designed the way it is as a measure of insurance, not an excuse to be careless. Ideally you never want anything to dry on your finish, but if its completely unavoidable or happens by accident the soap drying is far safer than the alternative. The soap serves to keep the minerals suspended and being pH neutral it will not etch the paint or introduce any damage.

 

Avoid allowing the soap to dry in the first place and you'll make life much easier on yourself, but what if it does get baked on? How should you proceed?? In many cases just the act of rinsing the area one more time with water right before you start your drying routine with a Great White Drying Towel and Detail Spray will be enough to 'reactivate' the soap and make removing it easy as you dry.

 

In the event you still have some soap residue that won't come cleanly from the surface try taking a small amount of soapy water, either from your soap bucket via a clean wash pad, or a foam gun if you're working with one. Essentially you will "re-wash" that panel to remove the soap.

 

Keep in mind that dried soap on your finish is MUCH better than the alternative which is dried water that could lead to stubborn water spots and etching. 2 conditions that will require claying and/or polishing to remove.

 

SOME TIPS FOR AVOIDING DRIED SOAP:

 

  • Wash in the early morning or around dusk when the sun is low in the sky and much less harsh. The less direct sunlight leads to much lower surface temps and lower likelihood anything will dry on the paint.
     
  • Work indoors or in shade whenever possible. A kin to the first tip, reducing how much direct sunlight is on the paint while you're working is key to preventing drying and in turn makes everything easier. In the event you don't have a garage or cover to work under look into purchasing a pop up shelter. Many can be found for $150-$300 and collapse down for easy storage when not in use. Your entire care doesn't have to fit under it... position the shelter so it gives you shade in the areas you need.
     
  • Avoid wetting/soaping the sides of the vehicle that are in the sun until last. Nothing says you can't wash the vehicle in 2 stages. Rinse and soap the areas that are on the shad side of the vehicle first then move to the areas in the sun. Keeping the 'sun exposed' areas of the car dry until absolutely necessary buys you significantly more time before anything drying becomes a concern.
     
  • Spend more time on your initial rinse. 2 things cause drying - the direct heat of the sun and the indirect heat of the panel temperatures. You can reduce the surface temps of the paint by a large amount by spending more time in the initial rinsing of the panels. Soaking panels for more time with water drops the overall temps and buys you more time before the soap (once its introduced) will start drying.
     
  • Most of all common sense! As stated in the beginning this is a case of 'Just because you can, doesn't mean you should'. If you absolutely must work in the worst possible conditions adjust your technique to compensate, work quickly, and understand that you are creating more work for yourself by working in unforgiving circumstances. Also, DON'T PANIC! The initial response is to grab a towel and start scrubbing aggressively... understand that dried soap is a surface problem that can be corrected with the gentle approaches given above. Scrubbing at them can potentially introduce bigger problems.
     
  • Lastly HAVE FUN! Caring for your car is something that can be a joy or a real pain in the rear... by choosing when and how you approach your wash you dictate how it will go... so choose wisely!!

 

:cheers:

Edited by Dylan@Adams
Link to comment
Share on other sites

14 answers to this question

Recommended Posts

  • 0

wow, great idea with the FAQ threads..

 

this one is definitely informative.. I will be getting a pop-up eventually to make things a little easier, but when I detailed the wife's Edge, I was constantly in the sun..

 

thanks for the tips!

Link to comment
Share on other sites

  • 0

Thanks guys... as questions become common via the forum, PM, or email I'll post one of these writeups. It seems when there is a question it comes in waves... washing right now obviously is a hot one due to how many people are starting to wash in the warm weather.

 

I suspect waterless vs. detail spray will be a big one next since so many people will have washed, but now need to maintain.

Link to comment
Share on other sites

  • 0

Excellent tip Dylan!

 

In the event you still have some soap residue that won't come cleanly from the surface try taking a small amount of soapy water, either from your soap bucket via a clean wash pad

 

I tried this tonight while it was warm and humid outside.

When I had washed the whole car, I used the wash pad to wipe the windows (my usual problem spot) before I did my pooling rinse. Worked like a champ! No wash soap residue on windows this time.

 

Thanks again Dylan! :thumbsup:

Link to comment
Share on other sites

  • 0

With hot weather all over the country, I wanted to give this thread a bump.

 

It was 94, with humidity at 75% when I washed our cars this morning. The soap did dry on the car, but once it was clean I wiped the car (quickly) with a soapy mitt to reactivate the suds, then did the pool rinse. No spots!

Link to comment
Share on other sites

  • 0
With hot weather all over the country, I wanted to give this thread a bump.

 

It was 94, with humidity at 75% when I washed our cars this morning. The soap did dry on the car, but once it was clean I wiped the car (quickly) with a soapy mitt to reactivate the suds, then did the pool rinse. No spots!

 

Only 75% humidity today? Pffft....it had to be higher than that! I was sweating just drinking coffee at Waffle House after we talked this morning!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...