Jump to content
Customer Service 866.965.0400
  • 0

Dirty roof found while correcting


Nickfire20

Question

I have been doing a full detail and paint correction on my wifes car the past few days. Today was correcting the drivers side and roof. The driver side went well, (3 step correction), doing just a single pass on the roof with orange pad etc... after a very small area on the roof, i stopped to brush out the pad and found this.

I had washed the vehicle last night, waterless wash today and clay mitt before the correction.

Mind you it has been over a year since its last wash, it has never been corrected, is outside 24/7 and a daily driver.

 

So 1) has anyone ever seen a car this bad before, if so all insight is invited.

And 2) can pads go in the washing machine? I've cleaned it twice by hand with APC and Microfiber revitalizer and its still a little rough (second pic)

post-15891-0-20861500-1501973096_thumb.jpg

post-15891-0-23608700-1501973105_thumb.jpg

Link to comment
Share on other sites

18 answers to this question

Recommended Posts

  • 0

Interesting stuff.

 

The car is a dark metallic blue, i dont think it has been repainted, I will ask. (EDIT-no known repaints) wife is original owner, she had it when we met.

 

Could the clear coat be gone? Never seen any peeling though

 

It is a 2006 Honda CRV suv.

 

Here is a pic

post-15891-0-34979000-1501975147_thumb.jpg

Edited by Nickfire20
Link to comment
Share on other sites

  • 0

Very interesting....should i try to buff it all off?

 

The hood, was pretty quick and easy even with 3 step, and no dirt/paint at all.

 

When i used sealant on the roof, it looks like the pad got a little dirty also. And before the sealant my white towel, that i used for the alcohol wipe down got some black on it.

 

Very interesting....hmmmm.

Link to comment
Share on other sites

  • 0

Ok....

 

I used adams pad, and griots orange correcting cream

I used adams clay mitt, rinsed it under the sink afterwards, just some light dirt and pink DS came out.

She has always worked where she had open parking lot, parking, except for the last 6-8 months, her new job has her in a regular parking garage.

I should also mention, her old house...she usually parked under a tree.

Link to comment
Share on other sites

  • 0

Ok we may be getting somewhere. I want to thank everyone for their assistance with this mystery, here are a couple pics i took today in the daylight. I did APC the roof rails, it does not have the cross members. I did VRT the rails and the rubber seal around the sunroof, 3-4 hours before polishing. I did go over the sunroof while polishing. I did not touch the luggage rails.

 

Are we thinking dirt from the rubber transferred?

post-15891-0-96150300-1502062594_thumb.jpg

post-15891-0-09731600-1502062605_thumb.jpg

Link to comment
Share on other sites

  • 0

It looks like rubber transfer off the sunroof seal. Try a bit of tyre and rubber cleaner on a microfibre towel and see if you get the same style of black residue? I had similar residue come off my side door seals as they had never been cleaned before I got my car.

 

The paint looks great btw - how did you find the Honda paint to work with? 

Link to comment
Share on other sites

  • 0

It looks like rubber transfer off the sunroof seal. Try a bit of tyre and rubber cleaner on a microfibre towel and see if you get the same style of black residue? I had similar residue come off my side door seals as they had never been cleaned before I got my car.

 

The paint looks great btw - how did you find the Honda paint to work with?

 

Ok sounds good, i will do that.

 

Thanks for the compliment, i only did 1 pass/1 step on the roof.

3 step everywhere else.

 

For the paint, this is only my second vehicle, and i have only used my DA a handful of times...but i found honda paint much easier to correct, than my brand new tahoe. The honda is 11 years old and was in very bad shape. So i don't know if age helps us or hinders us. Or if its truly the manufacturer.

Edited by Nickfire20
Link to comment
Share on other sites

  • 0

Are we thinking dirt from the rubber transferred?

 

This^^^^^

 

I recommend taping rubber trim to avoid this.  You can clean it all you want, but you will always get the transfer when you polish the rubber (ask me how I know  :))

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...