Sprayable brilliant glaze

[Red Rambler]

Any reason why I should not spray Brilliant Glaze? I have a bottle that does not have the sprayer for other needs. This bottle will be dedicated to inner windshield use. I will spray the microfiber application pad to apply BG to the windshield.

 

[Hamilton Detail]

The answer to this question can be found in this thread:

http://www.adamsforums.com/topic/28984-brilliant-glaze/page-2

[Red Rambler]

The answer to this question can be found in this thread:

http://www.adamsforums.com/topic/28984-brilliant-glaze/page-2

Thanks Andrew. I think I'll give it a try and see how it goes. Least that can happen is I toss the sprayer head and put the cap back on it.

 

Would diluting BG help in making it more sprayable yet still be an effective solution for the windshield haze?

Edited September 2, 2017 by Red Rambler

[Nathan]

I think the sprayer would get clogged but I have heard from Kerwin at Aloha Detail that it works well!

[Nickfire20]

I have lots of sprayers laying around, so I am waiting for results

[Red Rambler]

I will be doing three vehicles today using the BG, spraying it from the bottle if it doesn't clog. I will report back. I also have another sprayer I may try if the adams gets clogged quickly.

[Red Rambler]

Report back. I completed my BG application and used a brand new bottle of BG, and a brand new sprayer head. I used roughly an 1/8th of the bottle as this was the first application on all 3 vehicles, over kill I know, however I wanted ensure I was moving enough liquid for the test! It went on extremely easy and came off just as easily. The verdict on spraying the BG: it sprayed extremely well, just as good as the detail spray. I made sure to shake it well before each vehicle as to suspend any of the heavier particles in the liquid. I had 0 clogging issues. Now should I remove the sprayer and force warm water through it to keep the glaze from solidifying in the sprayer head? I think I might as Adam states in the video he does the BG roughly two times per year so unless I detail more than I think I will. I will clean and store the head and replace the normal BG cap. I had a spare bottle on stand by if I experienced immediate clogging. Unless the clogging happens as the bottle nears the bottom of the barrel, I would say I had success in doing this.

 

The arsenal:

Edited September 2, 2017 by Red Rambler

[Nitelord]

I also use the brilliant glaze as a spray. I leave the black lid on it. shake, shake, shake, then replace the lid with a sprayer. do the car and put the red plug and black lid back on it. The only time the sprayer plugged was the first time (8 years ago).The product settled out and I suppose plugged the tube at that point. Even after shaking the mix before use, the tube was plugged. Ever since then, I just do the swap and its been fine. Good Luck.