15mm Swirl Killer

[R/T-Shadow]

Hey guys, 

I recently purchased a swirl killer and have been using it to correct all the imperfections on my paint. As I was using the buffing pads, I started to notice small metal flakes coming from the backing plate. I looked at the backing plate and noticed that the bolt is loose. I have tried to tighten it but I can't seem to keep the shaft from moving. Can anyone help me with this? 

Thanks!

[falcaineer]

Sorry, no, other than recommend you contact Adam's customer service. If it's defective and anything can be done, they'll do it.

[blcksilv08]

18 hours ago, R/T-Shadow said:

Hey guys, 

I recently purchased a swirl killer and have been using it to correct all the imperfections on my paint. As I was using the buffing pads, I started to notice small metal flakes coming from the backing plate. I looked at the backing plate and noticed that the bolt is loose. I have tried to tighten it but I can't seem to keep the shaft from moving. Can anyone help me with this? 

Thanks!

Definitely give Adams a call on that one.