Ceramic flexible on bare aluminum?

[Hypnogoad]

Hello all! I have a 70's Airstream that I polish to a mirror finish on an annual basis due to oxidizing and hard water staining over winter months. I'm considering using Adams ceramic to coat it after the next time I polish to make it easier to maintain. Due to the age of the trailer, the aluminum sheeting is quiet flexible in the wind, will the ceramic coating flex with it? Or will it crack when it flexes?

 

Also if it will work, which product is best? I see there is "Wheel Coatings" in a bottle, but also "Metal Coating" wipes. Are these the same formula?

 

 

[Chris@Adams]

Good question, our UV Paint Ceramic Coating will flex with your metal. You are only putting a nanometer of thickness so that’s why it’s flexible. You should be fine.

[Hypnogoad]

Thank you for the quick reply Chris! Which formula would work better for my application? The Wheel coating or the Metal coating wipes?

[Chris@Adams]

I would use either our UV Paint Coating or our UV Wheel Coating. Just remember to do a good surface prep wipe down with either one you choose.