Jump to content
Customer Service 866.965.0400

kitt1987

Members
  • Posts

    80
  • Joined

  • Last visited

Everything posted by kitt1987

  1. Oh I will and plan on it. The bike is still in my parents' basement as I don't have a means to transport it to my house just yet. My Acura isn't the best at transporting large items so I'll either be grabbing a bike rack or borrowing a truck to bring it home and then I'll put the pictures up.
  2. Thank you! I was planning on washing completely with a follow up with the Revive Polish. Wasn't sure if the metal polish would help or not and also was curious on the Paint Sealant. Could I use the same products on the chrome once I figure out how to remove the surface rust?
  3. I think I remember reading that somewhere on this site...hopefully he comes across this and gives me a decent tip!
  4. Ok guys (and girls), a little different question today: I just came into possession of a vintage Schwinn bicycle left to my by my parents, it is approximately from the late 50's. I plan on changing the tubes/tires and chain. The body is in good condition and the chrome areas have surface rust. What Adams product could anyone advise for using on the painted metal all around the body. Since this is not clear coated I'm not sure exactly what to use. Should I consider the metal polish for the body? I want to enhance the finish and really bring the shine and gloss back to this old bike. I haven't figured out exactly how to remove the rust from the chrome areas yet if anyone has suggestions on that. Ultimately once I clean this bike it is going to be literally like new and like I said since it was left to me by my parents it's got the sentimental value going for it. Any help as always is apreciated!
  5. Thank you all, this helps. I'll stick with the all purpose cleaner then. I treat my rubber and vinyl pretty frequently (VRT is one of my favorite items in the Adam's arsenal) but still I'll work with what's best and forgo the Dawn treatment then.
  6. Hey all, I cannot find the information but in the next 4-6 weeks I will be detailing my car which involves stripping off last year's product (all Adam's of course), claying, sealing, then gloss. My question is, I know I can mix the all purpose cleaner in with a bucket of suds to strip off all wax, etc....is it true I can also mix in Dawn dish detergent with the car wash soap to strip? The Mrs. bought plenty of Dawn a couple of weeks ago (more than I think we'll need) and I'm thinking of using that if it truly works. Thanks in advance!
  7. I'm sorry to hear others have had issues with VRT, after my first few months of using Adam's products, it's turned out to definitely be one of my favorite products (that's saying something because I really enjoy all of their products other than a couple things I haven't tried and don't truly need). With all the rain we've had in Ohio this summer I was personally surprised by the durability of it and how I've only had to touch it up 3 times since my initial application in May. I've had no run off, spotiness, or anything. I've even dressed my engine bay with it and still looks new. As others have said, maybe it was an "off" batch or maybe it has to do with the plastic/vinyl on certain vehicles too. Really stupid suggestion, do you think it might have something to do with the quality of rainfall you've experienced in your area? I just wonder if it happens mainly during heavy rain.....
  8. I also say that you made a good choice by sticking with the 10x10, that's my preference anyhow but by keeping the cost/price low I would say it is a win-win for most.
  9. Well I'll be damned, I've been out of touch the last couple of months and just came across this. I live 10 minutes from Columbus. Hopefully you guys will have another event in the future and I hope this past event went well. I know I turn as many people onto your products around here as I can as it is and would love to help out officially in the right enviornment.
  10. Thanks everyone, no I haven't brushed them but I do have 2 or 3 others in reserve. As Dylan and others have mentioned about the wedge I might go that route for my top half. I'll be keeping my eyes open for some good deals as they're released.
  11. Just wondering if it might be time to retire my wash pad. Have been using it once a week since the beginning of April and it was great at slathering the suds on my car. The last two times it's barely retaining any of the suds and appears to just spread slightly soapy water on my vehicle. I've done my best to maintain the pad properly, cleaning and air drying it after each use (cleaning = thoroughly rinsing with the hose only and squeezing out excess water) but am at the point in wondering if it's time to "hang it up" for this one. Any thoughts on this?
  12. I'm feeling ya! I spent a good deal of time between mine and the wife's car this past weekend to the point they were immaculate! Drive to work Monday only to have construction begin a quarter mile up the road followed up by the surprise spit shower. Oh well. lol
  13. On those door panels you can even try VRT(after cleaning) and it offers some protection and won't run when you open the door in the rain.
  14. The acidity of your water doesn't sound too bad to be honest, I know anything with a pH <7 is acidic but that's not too terrible. I do believe a lot of Adam's cleaning products neutralize the water, including the shampoo wash so you should be good. That's why it also helps to spray a shot of detail or the new H20 spray on each panel after you rinse because those neutrailize the water as well alleviating most if not all water spotting.
  15. I think it all depends on the "look" you want (as well as odor) and what type of car you're using. I do agree with Matt above in that the TID streaks on smooth plastic pretty bad. This just happened to me in that I used it on my dash (a 2013 Acura TSX) and left behind streakmarks I haven't had a chance to rub out yet. What does everyone else typically use on the smooth plastic area? I'm guessing the cleaner only?
  16. I concur, Adam's Waterless cleans and wipes away completely. It's the perfect side item to use under hood, door jams, trunk area, etc....plus it smells good too!
  17. I agree Jason, I remember the old days of wearing my arm out and spending more than a day on the perfect finish. I just applied my LPS this past weekend so I might wait a couple of weeks on the H20 and use it as a booster.
  18. This morning on a whim (had the day off) I decided to wash my TSX followed by a good round of claying. Pretty proud of myself as it was my first time with a clay bar (Adam's big blue bar) and I never came close to dropping it. Followed with a layer of Adam's Hand Revive Polish then with a round of Adam's Liquid Paint Sealant." Once removed I added a layer of Brilliant Glaze. Man does that stuff add that "pop" that everyone talks about. I have not waxed yet but that will come in the future, I did however seal my glass and spray Quick Sealant on the headlights and taillights. Finally I used the Super VRT on the trim and seals. I have not had a go at the tires and wheels yet, with a full schedule that might wait until my next wash later in the week. Hope the picture shows the shine well enough!
  19. That sounds good, thanks guys. I have two now but might bite on the 3fer deal at $25 being offered currently just so I always have a good one on standby.
  20. Is there typically a life for the wash pads as to how long they last or how many washes you can get out of one before it can't take any more?
  21. Since I got my new car a couple of months back I only use the touchless washes as others have said to get the heavy grime off in addition to spraying the underside of the car. Sadly I think Dylan mentioned somewhere that I believe whatever chemicals they use in their soap has caused the rubber molding around my moonroof/sunroof/whatever to discolor. Good thing for Super VRT!
  22. Just checked my local forcast....after today, rain, rain, and more rain for the next 10 days....I know I'll eventually be able to get to all my product...soon!
  23. Today's the big unveiling....drumrolls are starting...
×
×
  • Create New...