JenovaImproved

I have a Tesla 3 with Adam's Advanced Ceramic Coating on it, coating 1 year old, 2 layers just to make sure i didnt miss a spot. I did a foam cannon coating of Strip Wash, aggressive powerwash rinse, sprayed Iron remover than powerwashed it off again, aggressive hand wash with Graphene Shampoo and edgeless microfiber towels, and I still have these yellow pollen spots on it I have to scrap off with a fingernail. What can I add/change to make these come off during the regular wash steps? I was hoping that with a ceramic coat I would merely have to powerwash biweekly but even a full double step wash isn't taking stuff off. I will add that it seems like the ceramic barely works anymore on the sky facing panels and especially the glass, I'm wondering if the heat of the sun is burning it off. The side panels bead up amazingly well and the roof doesn't at all anymore. It will sheet off eventually but not those big lumps like ceramic is supposed to. I have a UV flashlight to check the coating but something about the red tesla 3 paint makes it not glow well, i can see the headlights glow super good but then the paint right next to them i coated at the same time doesn't glow at all - but beads up like it should.

I have Teslas with adam's graphene advanced on them (6 mo old). I try to wash every month but sometimes it's every 6 weeks. Parked outside but in socal so it's not that bad. My wash usually consists of a foam cannon with Strip Wash, powerwash it off, then a graphene shampoo with TRC edgeless towels 1 per panel. Obviously I'm trying to avoid scratching. I don't press too hard or go in circles, try and press just enough to get stuff off. Problem I'm having is that, especially on the glass roof, I'm having particles and stains spots that aren't coming off during these washes. What would you suggest I do to step up the aggressiveness to take off this stuff? I could use a slightly more concentrated strip wash mix during the power wash step, press harder during the hand wash, use a more aggressive cloth for the washings. I specifically have yellowish stain circles building up on some decals (also ceramic coated) that maybe I should try to clean off with surface prep alcohol sprays? Maybe the glass should be cleaned with a glass cleaner (even tho it's ceremic coated too?). Honestly don't know what to try first suggestions appreciated.