Jump to content
Customer Service 866.965.0400

pilatti1

Members
  • Posts

    51
  • Joined

  • Last visited

Everything posted by pilatti1

  1. I just purchased the following do detail my car which is in pretty good shape paint wise: Surface Prep Graphene Ceramic Spray Coating Graphene Detail Spray One Step Polish Do I clay bar, then surface prep, then one step polish and finally the Ceramic Spray Coating? Any suggestions? Just want to make sure I have all the steps in the correct order
  2. I was told you can use VRT on plastic rear windows. I have a 1965 Mustang Convertible & want the plastic rear window to look like new. It is about 10 years old and has some scratches etc. Will VRT work or what else can I use?
  3. Thanks for getting back to me. Unfortunately I do not remember her name but both times I stopped in to make a purchase she was helpful. Great to see such awesome customer service. keep up the good work & come to new England more often
  4. Needing some supplies from Adams I was excited to see they had a trailer at Barrett Jackson this past weekend. Not only was the staff friendly & knowledgeble but the deals were great as well. I just wish you were in New England more ofter as I love all your stuff. Keep up the great work
  5. My car sat outdside at a dealer and now has water spots on my Matte Stripes. I tried Detail Spray and it is still visable. Any thoughts on a good process to get them out & make the stripes look better? Thanks
  6. So a few weeks ago I used the Black Trim Restore and i just noticed it on my paint. I tried clay & detail spray to remove it but no help. Any ideas on how to get it off safely?
  7. So i am getting a shipment this week with a couple new products for me the H2O Gloss & Americana Wax. My car has been recently paint corrected and also added the buttery wax. Should I now use the Americana and then when complete use the H20 after wetting it all down? or is it he other way around? Just trying to make the car look & shine as well as protect so want to make sure I am doing thing in the correct manner
  8. I have used the Brilliant Glaze on my inside windows with good results. Can it be used on the outside windows/windshield ? Thanks
  9. I just purchased a 2015 ROUSH in orange and it has a black hoods scoop decal. What is the best way / product to use to keep it looking new
  10. Thanks for all the help...looks like Deep Wheel Cleaner & Woolie will be on my next order. Have a Happy & Safe New Years
  11. I have a 2002 BMW 325xi with the aluminum rims (see below) What is the best way to clean them as there is always a bunch of brake dust and yellowish residue in all of the corners. Not sure if the Turbo Stick or Wheel Woolie would work?
  12. Thanks all I really should have taken a before pic but was to anxious to get to work on the Big Black Bus! The interior was not bad so I did not spend a long time doing it. However the outside took about 4 hours and he did not want the roof done so that saved me a lot of time
  13. A buddy has a 2011 Suburban that was in need of a detailing job in the worst way. I should have taken before pics but there was no shine at all (I could not see myself in the paint). So off to work I went -Clay, Paint Correcting Polish, Finishing Polish, Buttery Wax, Detail Spray, VRT & TLC...By the way the Adams Cart on Wheels is the way to go - just sit down & detail away as it makes it easier and less back pain from getting up & down.
  14. I detailed the Charger today and used the VRT and the stripes looked great. The Charger came out great so I decided to do my 2002 Yukon XL with 270,000 miles and plenty of scratches but using all Adams products it looks almost new!
  15. I am going to detail my buddy's Yellow SuperBee which has stripes on the hood etc. What should and shouldn't I do to them as I want them to look good but do not want to damage them in anyway. They look ok now just dull looking.
  16. I really would like to make this one so I put it on my calendar, but need to stop by prior to get more Adams Products so I can shine like the sun will shine that day!!!
  17. True the Corvette Store in Cheshire does exist as I was there and made a purchase of product. nice friendly & helpful people I was just not sure if they were expanding to Hartford but it must be someone else trying to get in on the Adams great product line.
  18. ^^BUMP^^ website is still up so I was wondering if this will ever happen??
  19. Now if we can just get an answer as to when it will open we will all be happy!
  20. I just replaced the carper (2nd time in 10years) on my 1965 Mustang Convertible. The carpet was in ok shape but since the top is down a lot in the summer it had fadded from a dark blue to a light blue. What can I do to prevent this from happening again (other then keep the top up in the sun). i do not want to keep replacing the carpet just for a fading issue. Any thoughts or ideas would be appreciated.
  21. It is suppose to be a new dealer and be the first Adams Spa where they will detail your car for you. Sounded like a great idea when I spoke with the guy that was going to open it up when I was at a car show - he even had a large Adams tent and was seling product.
  22. Does anyone know when the Auto Spa in Hartford will open? Sounds like an awesome idea! http://www.adamsautospa.com/ The building still looks empty so i am not sure what is going on!!
  23. Does anyone know when the Auto Spa in Hartford will open? Sounds like an awesome idea! http://www.adamsautospa.com/ The buildinf still looke empty so i am not sure what is going on!!
×
×
  • Create New...