roushpwrd

I'm sorry to hear about this....I swear I have seen this truck around close to where I live.....or you have a double out there....hmmm

Thank you...I knew I read this somewhere before but couldn't find the thread....your reply is greatly appreciated........

Cleaning the Gen 2 pads......a little all purpose cleaner, a good rinse and a good drying before use....is this correct??? Thanks for helping my lazy @$$!!!!!

I haven't got the caster camber plates....this car has been lowered for a few years....just in need of new shocks and struts now. Possibly some plates too.....who knows......

That's a big help...I will try them for what they cost. I want a medium type ride...not too stiff but not sloppy. I'll order them tomorrow.....thank you!

I have the same lowering springs also.....so do you like these shocks/struts? I found a great deal on these and I was thinking of ordering them. Do they give a stiffer ride than the stock shocks/struts? If so....then I will get them. Thanks for your input!!!!

This yellow is sharp!!! I like it!

Me too, Thank You!!! I need to get a good stiff set of rear shocks....at a reasonable cost...any ideas???

I did get to call my Mom today....she was released from the hospital after a week today....she is a mere 66 years young. Thankfully she is well......it appeared to be complications setting in from a surgery she had years ago. Happy Mothers Day Mom!!!

No...ha ha!!! I came in and had a Bud Lite!!!!! Something he could only dream of having!!!! I should open a Bud Lite stand in my front yard and laugh at him for being 11 years old!!!!! Can you picture that....ha ha ha!!!:lol::banana:

I am so glad there is no noise in my KB.....but I do need to replace the 2 small idler pulleys....cheap fix......my clutch is still good and I dread the day it isn't....well....actually I have friends that can change it in short time....both Ford mechanics.....so dreading it won't be too bad.....

Right now I have that total innocent look going on.....and no I didn't help him. He was selling lemonade at his house today and asked me if I wanted some.....40 cents if he delivered it and 35cents if I walked 2 houses down to get it......what ever happened to free delivery.....:lol:I'll shove a 2X4 in his spokes.....better yet...I'll charge him $200 to detail his bike with Adam's polishes!!!! You had to see it.....I had to come in.....it killed me!!!

OK...there are a few boys in the neighborhood that ride their bikes back and forth all day.....and I am usually cleaning my car so this one kid stops and says to me, " That car of yours seems to be the main activity in your life"!!! I laughed because a kid minding his own business riding his bike noticed how I am about my car!!! Then the funny part.....he was looking at me again and crashed his bike into a plastic trash can across the street and fell off his bike!!!! I had to come in the house, I couldn't stop laughing!!! I wish I had a picture to top it off with!!!

As soon as it stops raining and dries up out there, I am on my way to sears!!! I need a good cart like that also!!!!

I may have found the issue.....to start, the car is lowered, has an aftermarket differential cover installed which is thicker that the original and needs better rear shocks. There has been a few times when I hit a certain bump in town that the rear end slams hard and causing it to bottom out on the bump stops (I will avoid this bump now knowing it is there). This caused a fuel line of some sort to crush...a plastic line at that. I got a new one and feel this will solve the issue. It feels like it gasps for fuel or gets a temporary bubble of air in the fuel causing the sputter/stall. I can see where the cover made contact with the line and it flattened it....a friend at a Ford dealer searched for the part and we ordered it. A simple "no tools needed" fix......I am sure this is it.....

OK...lately my 2002 Supercharged Mustang has been stalling. At one point it stalled for a split second and then the tach didn't work for a minute or so.....has anyone ever heard of such thing.

It has come to my attention that a forum member, need4speed08, is heading out to the gulf this coming weekend. I wish you a safe trip and hopefully you will be home soon. Thank you for all you are doing to keep us safe here in the USA and in the world. I'll catch up with you in Richmond someday for a NASCAR race!

Parker Hannifin in Ayer/Devens MA has positions open. Engineering and Liquid Cooling Systems. It is an aircraft related employer.

Laser jamming is a touchy subject. This unit is not illegal in Massachusetts according to Blinder and will cause no problems if used correctly. Laser jamming near any defense system is obviously illegal anywhere. These units are illegal in Washington DC and a few surrounding states just as radar detectors are. I am waitong to see the results as I cruise on by the laser trap!!! I can test it out here where they are set up on nearly a daily basis.

I have done a bunch of research on the Blinder's capabilities and finally ordered one. It is on the floor of my Mustang GT covered by a jacket...I'm sure you all know why!!!! So...let's move on....and don't anyone call my wife and inform her of this!!!! She will see it soon enough.....probably when it alarms me of a State Trooper trying to hang my @$$ for speeding!!! So...the dilemma was, where to drill and mount the on/off switch....then it came to me, an ashtray delete cover which I found on uprproducts.com. Enclosed is a picture and I can have them laser etch it at work for me with the on and off position of the switch. Then I can paint the letters black to match the switch..which in turn will match my interior. If anyone knows where I can get a black one, would you kindly let me know where.

That's some serious debris....you might need a clay bar to remove that stuff!!!! Now I want spaghetti...and meat balls.....with a salad.....mmmmmm.....have any leftovers you can fax me!!!

Bill, you're killing me.....

YIKES....I think I just had my @$$ handed to me....I called yesterday to get a price on mounting 2 drag radials to my wheels...new and off the car....they quoted me a cost of $70.....they just called to let me know they were finished, I asked what the total was and they said................$150.00 I wish I read the posts before I went here......I'll never go back to this place....."let's take Jim for a ride in this tough economy"......oops...a thought slipped out!!!

In Massachusetts, it is up to the chief of police to decide if one is issued or not...the application does have to go to the state for processing also so it is not the sole discretion of one person. I have had mine for more years than I can remember. If a new applicant applies, he/she must take a written test and also take a firearms course. A felony and/or a domestic violence charge will prevent anyone from obtaining an LTC in Massachusetts and a DUI/OUI is also grounds for revoking/preventing anyone from processing such license. There are so many loopholes also...

Thank you all for the responses....I actually dropped them off at KTR racing in Ayer....they are mounting them for me and I will pick them up tomorrow....that waiver thing scared me and I did run!!! I will keep the other places in mind for later...Thanks again!!!