gdwenger

To answer my own question, here's their response: Unfortunately; we are doing no custom fabrication at this time. Thank you, Elaine Bell Blazin Bell Tech, Inc.

Wonder if they could do a knock off of these, less the laser knockout? http://www.adamsforums.com/topic/28790-hanging-polishers/?p=450397

Double sided magnetic tape would be a nice adder. But than again if you really did a complete detail, you have already removed the existing plate and for some the frame/holder

That's the benefit of the boom. Swing it down and and its gets lower then the rocker panels. Also very handy for extending over the hood and pointing straight down

Care to comment on why you chose not to also offer the Duetto model?

followed a similar write up about a year ago and best setup to find even the smallest of defects.

Nor do I, gave the PW to my brother which I should have done in the first place.

$45.00 shipped. Has a Karcher fitting currently installed. Photo can by seen in my previous post of the washer/cannon FS. (Buyer never showed) -Gary

added additional products

Removed photos of sold items

Started on this

Oops, yes. You may purchase everything or just a single item.

Sold

Anyone know what's going on with the SCG forums? There hasn't been a post since mid November. (He asks sarcastically)

Yes, any where in the contential US.

gone to Timmy8784

Adding more items

Man do I need to do that to my wheels. Looks great Kris.

30 oz. Super V.R.T. 8 oz. Revive 10 oz. Shampoo 50-70% Metal Polish 1& 2 50% Glass Sealant A gallon pump Misc microfiber towels used to package this box - FREE (you need to cover $25 shipping cost gone to Timmy8784

Shipped to phenomvw gallon of All Purpose Cleaner - FREE (you need to cover $17.50 shipping cost)

Shipped to RedBull 3/4 gallon of Undercarriage Spray FREE (you need to cover $17.50 shipping cost)

Yes it would be the next step up before changing to both more aggressive pad & polish. The color design of pad to polish is a nice feature, a simple guideline if you will, but it's not set in stone. You really need to mix up your pads and polishes by testing each pad with each polish to fine tune what will give you the best results. You might find that you don't need another more aggressive pad. And if you do, test that pad with each of your polishes starting at your least aggressive.

I would suggest changing to a smaller backing plate than and use a 4" orange microfiber with the SSR. Or even going with the drill option

First, there exists no industry standard for color coding pads. Each mfg has their own, example two of the largest are Meguiars and Lake County. A second point is your not telling us what size backing plate you changed to, even though colors will remain constant through-out pad sizes for any given mfg. Depending on the machine your using most smaller pads will correct faster than larger pads The product will work with any color pad it's what you need to accomplish that determines how aggressive of a cut your after. Based on if your backing plate is the correct size there is nothing stopping you from using Adam's orange pad now to remove most if not all your swirls. If you need to further address some RIDS step up to their microfiber pad. A plus to this is you won't have to be looking for new pads when you do update to the current versions. Also remember that all chemicals have a shelf life. So while you may have 75% of green polish left it's ability to perform as when purchased may not be 100%

A little sealant application on the MX5