jonaandkell

Thanks for the info. I read over what you sent over and was pretty familiar with all that info. There wasn’t a ton of info about ceramics in it. I’m at around half or less than half a bottle on PS/BG/BG BW. No huge loss there. However I have nearly 3/4 of a gallon of DS. Use that stuff for everything. A quick interior “dusting”; a cleaning of the exterior if it’s slightly dirty such as dusty when sitting in garage or driven a day or two in dry non rainy weather; and a drying aid after washing. Drying is my main reason for DS but I also have the guard and gloss too (forgot to mention that) for drying once a month or so just for some extra protection. I have around a half gallon of it too. to answer your question on washing I use wash and wax (orange). I have a little over a half gallon of it. so what is the negative affects of using DS or G&G on ceramic until I run out? Or should I just keep doing what I’m doing until it runs out and then make the change over to ceramics? Love the forum where I can ask these questions.

I have been a long time user of Adams products (first ordered back in 2012 with the DS) and wanted to reach out how to make the conversion from the traditional wax/sealants to ceramic. From reading around it appears the paint correction is still the same. I'm still using the old school 3-step system (I still have lots of product and it still works, so why change it). From this point I think it would be a little different. Here is roughly my process all done with Adam's Products: -Wash/Clean -Clay Bar -The 3 step polish method, think it was orange to green to white 1) Severe Swirl & Haze Remover (if it was really needed) 2) Swirl & Haze Remover 3) Fine Polish -Then I would seal/wax using a few different methods: 1) BG then Buttery Wax -or- 2) BG then Paint Sealant -or- 3) just Paint Sealant for a daily Love the Brilliant Glaze! What would you do after the paint was corrected? Just use the ceramic and be done? (Still researching exactly which one I want to use and that process) Does that mean all my BG, PS, BW and DS that I have are no longer any good or can't be used once I apply the ceramic? Can I still use my other washing products? Basically is there anything I can't or shouldn't use once a ceramic has been applied. Like I figured it would be dumb to apply a wax on top of a ceramic since it wouldn't offer any more protection and wouldn't 'bond' to the paint.

Question on layering... Can I use lq paint sealant,brillant glaze,buttery wax,then finish with the sealant again to get the most protection with a great shine? Or is it just overkill. Currently I use the bg,buttery combo and love the shine on the black paint, it just doesn't last long, the reason I got the lps. Thanks guys!