man5011 Posted April 26, 2012 Share Posted April 26, 2012 Hey All, I just recently finished a full exterior detail and paint correction for a customer using my Adam's products. This one was worth sharing! Customer indicated they had some swirl marks they wanted me to remove. Sounds easy enough; much to my surprise, this is what I received! I was told they noticed it after they waxed the car. Apparently they washed it one day and waxed it 3 days later without rewashing. I had my work cut out for me on this one... Tools used after wash and clay bar: Flex Machine Polisher Adam's Severe Swirl Remover Adam's Swirl & Haze Remover Adam's Fine Machine Polish Adam's Machine Super Sealant Adam's Brilliant Glaze Adam's Americana Premium Carnauba Paste Wax Adam's Super VRT for tires and trim Before After Before Headlight Restoration After Headlight Restoration Link to comment Share on other sites More sharing options...
THE Mook Posted April 26, 2012 Share Posted April 26, 2012 GREAT Work! Stunning! That little guy was beat down! Link to comment Share on other sites More sharing options...
mdwatts11 Posted April 26, 2012 Share Posted April 26, 2012 Wow. Those are some AMAZING results! Link to comment Share on other sites More sharing options...
JBlack151 Posted April 26, 2012 Share Posted April 26, 2012 :jawdrop:HOLY MOLY!!! That car was trashed. Hats off to you for making that amazing turnaround!!! :bravo: Link to comment Share on other sites More sharing options...
02Xtreme07ss Posted April 26, 2012 Share Posted April 26, 2012 Awesome recovery! Link to comment Share on other sites More sharing options...
Ragweed Posted April 26, 2012 Share Posted April 26, 2012 Could you have gotten the same results using thePC?? The car looks great!! Link to comment Share on other sites More sharing options...
DTrem13 Posted April 26, 2012 Share Posted April 26, 2012 This looks great!! How long did this take you to complete? Link to comment Share on other sites More sharing options...
Doug123 Posted April 26, 2012 Share Posted April 26, 2012 Man, that thing was beat up. I got nauseous looking at those dense swirls and haze, no kidding. (Aaaaaah my Eyes, my Eyes!) Looks like they dried the car with newspaper. What were all those little cloudy dime sized spots? btw GREAT recovery! Now it's looking like it came from the factory... Link to comment Share on other sites More sharing options...
Chuckkilo3 Posted April 26, 2012 Share Posted April 26, 2012 Outfreakinstanding job. Link to comment Share on other sites More sharing options...
Doug123 Posted April 26, 2012 Share Posted April 26, 2012 Could you have gotten the same results using thePC??The car looks great!! Yes, but it would take more time to do so - Link to comment Share on other sites More sharing options...
man5011 Posted April 26, 2012 Author Share Posted April 26, 2012 This looks great!! How long did this take you to complete? I had approximately 16 hours in this one, start to finish. Thank you all for the compliments!! Adam's did all the work, I just pulled the trigger Link to comment Share on other sites More sharing options...
Chuckkilo3 Posted April 26, 2012 Share Posted April 26, 2012 I had approximately 16 hours in this one, start to finish. Thank you all for the compliments!! Adam's did all the work, I just pulled the trigger You made it do what it do. Link to comment Share on other sites More sharing options...
camaro2ssblack Posted April 26, 2012 Share Posted April 26, 2012 Could you have gotten the same results using thePC??The car looks great!! Simply no...unless you have months and months to get the job done. Link to comment Share on other sites More sharing options...
BlueGenCoupe Posted April 26, 2012 Share Posted April 26, 2012 :jawdrop: Holy crap, how do you get swirls that bad? Amazing turn around though. Very impressive:2thumbs: Link to comment Share on other sites More sharing options...
Ralfy Posted April 26, 2012 Share Posted April 26, 2012 from everything i have read and understand, the PC will not get this kind of damage out? Link to comment Share on other sites More sharing options...
3PedalMINI Posted April 26, 2012 Share Posted April 26, 2012 O.M.G. Whoaa! they had to of done more then just wax it 3 days later, i dont think it would cause that much damage. Did they rub the entire car down woth a rag that has been thrown around for 15 years then cleaned in sand? WOW ive seen some F&$*@D up cars in my time but that by far takes the cake! Nice job man! i hope you charged them well, you earned ever penny Link to comment Share on other sites More sharing options...
Marylander Posted April 26, 2012 Share Posted April 26, 2012 Unreal! GREAT Job!!!! Link to comment Share on other sites More sharing options...
J Tegeler Posted April 26, 2012 Share Posted April 26, 2012 wow that thing was hammered! They must have waxed with a wire brush! AMAZING turn around! Link to comment Share on other sites More sharing options...
Jasssc Posted April 26, 2012 Share Posted April 26, 2012 Wow!! Amazing results! Congrats ! Link to comment Share on other sites More sharing options...
Chris@Adams Posted April 27, 2012 Share Posted April 27, 2012 Whoa, nice save! Link to comment Share on other sites More sharing options...
Chase@InsanePaint Posted April 27, 2012 Share Posted April 27, 2012 Holy bajeezus!!!! I mean good grief that thing was tore up from the floor up!!!!! DAAAAAAAAAAAAAAAAAAAANG!!!??? Hats off to you sir. Hope ya had a few cold ones as you sat in admiration when you were done!!! Link to comment Share on other sites More sharing options...
mc2hill Posted April 27, 2012 Share Posted April 27, 2012 Nope, don't believe, that is a repaint and new headlights! j/k! Great work Mike. Link to comment Share on other sites More sharing options...
rwisejr Posted April 27, 2012 Share Posted April 27, 2012 Dude what did they wash that thing with sandpaper ? That is and outstanding save ! Great job . Link to comment Share on other sites More sharing options...
07 z-oh-6 Posted April 27, 2012 Share Posted April 27, 2012 Nice work! You should have had some halogen pics after the correction, too. Link to comment Share on other sites More sharing options...
InDepthAutoDetailing Posted April 27, 2012 Share Posted April 27, 2012 My eyes! My eyes! :help: Great work! How many passes of SSR did you do? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.