Jump to content
Customer Service 866.965.0400

Sister's Thunder Grey CTS-V


Holder

Recommended Posts

Took a trip down to Baton Rouge to visit the family and have been wanting to get my hands on this car for awhile. The timing never worked out but this trip it all came together and had a chance to clean her up the right way. This car was a joy to work on, only real swirls I found were on the center console and the wheels. But it did need some attention. I started with taking care of the interior.

 

After a vacuum I cleaned all surfaces with LIC and went back and applied LC.

 

Before shot still in the garage at 7 am.

e2u8yhy5.jpg

murasyha.jpg

Swirled center console

yryzu5e6.jpg

Polished 4" Focus pad SHR & FMP

4ezuryme.jpg

The LC really makes a difference.

y9yqe9es.jpg

 

pudapyqu.jpg

Exhaust tips were in bad shape

8a3ybyby.jpg

The engine bay wasn't bad but the strut tower brace needed to polishing

uny3ebe5.jpg

Link to comment
Share on other sites

More shots

tetuneze.jpg

The brakes on these cars create some nasty dust

e9a6udum.jpg

Started with APC on The tires and fenders

a8e5a6e5.jpg

Cleaned wheels with GWC and the appropriate combo of brushes and of course the turbo stick.

jagunuza.jpg

vy2asu8y.jpg

adusygu4.jpg

Cleaned the engine bay with APC and boars hair brush and lug brush

ry4a2aqe.jpg

Then went around the car with lug brush and cleaned all emblems, the honeycomb grilles

pyza9e6e.jpg

Link to comment
Share on other sites

More shots.

Was only able to fit one bucket In the trunk of the Cruze so she only got a 1 bucket strip wash with APC and car shampoo. I advised her She needs to purchase some buckets with grit guards.

a3egy8ez.jpg

Blew all the cracks and crevices with the sidekick

bezemedu.jpg

Polished up the strut tower brace with metal polish #1&2. You can see the oxidation on the right.

y7u7une4.jpg

Applied some quick sealant to keep it protected

e3etahep.jpg

All done with the strut tower brace

3a3u8yry.jpg

Showing how great the Super VRT is.

a7y3u2e9.jpg

Getting the tight spots with In & Out

udu9u8uj.jpg

upugybyg.jpg

Link to comment
Share on other sites

MOre shots.

rygy3etu.jpg

Super VRT on tires

y7ajemut.jpg

ja4y9yme.jpg

Applied QS to wheels the some BG

y9a9epe6.jpg

Polished tips with MP # 1&2 then applied so e QS

busuhaby.jpg

Then went to claying, wasn't too bad just some road tar

mumuryqe.jpg

I then polished with FMP using the Flex. Then applied QS to entire vehicle and finished with 2 coats of APW. Also all rubber/plastic trim was treated with Super VRT and all chrome received a coat of BG along with the glass.

y9umazuj.jpg

Here's the finished shots.

y4ybazy6.jpg

Link to comment
Share on other sites

Great results! What did you use on the center console?

 

When I have a chance to sit down I'll edit all the pictures with captions. But I uses a drill with 4" Focus pads. 2 passes SHR 1 pass FMP.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...