Americana Applicator question

[Superdutytd]

How can I clean it? I put a coat of AW over my mustang and it picked up some grime from the bottom of my rocker panels (my fault for them being dirty) should I simply wash it with some water and soap? I've got friends cars lining up outside for wax jobs!

[Bill-V8V]

I'd just use a little APC or a squirt of Dawn and rinse it out good, should make it good as new :thumbsup::thumbsup:

[Team Adam's]

Dish soap and warm water. The dish soap does a better job of breaking the wax residue down IMO.

 

Next time don't wax over dirty panels... you should know better young man!! As a matter of fact you're grounded. Go to your room and think about what you've done

[11chevz71]

Dish soap and warm water. The dish soap does a better job of breaking the wax residue down IMO.

 

Next time don't wax over dirty panels... you should know better young man!! As a matter of fact you're grounded. Go to your room and think about what you've done

 

 

Yeah( The funny part is he is alot older than me but, he still should know better.

[Superdutytd]

Come on guys it was on the bottom of my rocker panels, I'm going to say I was just waxing too low!

 

Thanks I figured to just use dawn or APC but I wasn't positive.

[BrianT]

Dish soap and warm water. The dish soap does a better job of breaking the wax residue down IMO.

 

Next time don't wax over dirty panels... you should know better young man!! As a matter of fact you're grounded. Go to your room and think about what you've done

 

 

ROTFLMAO:cheers:

[Chewy]

I've been using my GWC to clean my pads and such... Works the bees knees!

[GerryC]

Will the applicators be available separately? I have visions of myself tearing this one in the future:lolsmack:

[Superdutytd]

I'm sure they will be. You really should make sure you have a REALLY clean surface before going over it with Americana!

[GerryC]

What I meant by tear was the handle part ripping off because of aggressive twisting

[11chevz71]

What I meant by tear was the handle part ripping off because of aggressive twisting

 

 

 

This would be true because you would need to get the wax work into the applicator.

[mcss383]

I was just giving mine a light 60 degree turn and back, sometimes 2, and picked up all the wax I needed to do a 1-2 sq ft.

 

But I would love some of the applicators for other uses. Using this applicator is the FIRST TIME EVER that I have not had one pop out of my hand. I ALWAYS have that problem when working on the lower portion of the car, but it never even came close with this one.

[jjwvette]

interesting