joffems

The only issue I had was I needed to rinse the wheels better. Thought I got it rinsed good but when blowing out the water it was coming out purple where some solution got trapped between the lip liners and around the calipers/ backside of wheels. No biggie Went back and rinsed again. Turned out great imho.

Did you rinse with the hose or a pressure washer? My DWC hasn't arrived yet, but based on my experience with similar products I find using a pressure washer to rinse the wheels really simplifies the task.

Welcome!

If you haven't already watched them, checkout the Adams videos.

Instructional Detailing Videos

They are the best place to start.

and FYI, MTM Hydro is an Italian company. for those with the gun, is there any part labelled "made in China or Taiwan" on it?

The dial says, 'made in italy' and can't find any engravings on any other parts, though that doesn't mean too much in this day and age.

If you already have a pressure washer, the MTM is a great tool. I found mine on sale for $60.

I put 2oz of Adams in and fill it up to the 18oz line with warm water. Give it a shake and then create great foam.

I also marked up the side of my bottle so I can quickly add soap and water.

If you have a spare LAN port on your router you can simply go router - cable - switch. There is no need for an switch in the office.

For cabling, CAT 6 is the way to go. When wiring, remember that the cable, with patch cables, cannot exceed 100m (about 325 feet).

If you don't want to run the cable, you can use a wireless repeater to grab the WiFi signal at the edge of your house and then run the LAN cable from the repeater.