Capehorn3

Would you recommend putting Brilliant Glaze over Buttery Wax for more shine, or a second coat of Buttery Wax? Road trip coming up and bug splatter on my 2018 Stingray is a worry.

Ditto on DS then back in the jar. Probably picked up some bug guts at some point, needed an excuse to order some new American clay!

Well, when I folded it up a few times the mildew was only on the outside, small amount. After wash and dry I pulled a bag test and decided not to clay. That Americana has been on 8 months and still shines like just done!

Going to clay and wax the Vette Sunday and found mildew on my Adam's clay, still OK to use?

As a follow up I used APC on trim and it removed all wax marks. Reapplied VRT and did a Brilliant Glaze layer on paint, looks so good! Thanks for the advice.

I did use VRT and blue tape before waxing and couldn't understand the white showing up around 10 days after waxing. At first I thought maybe it was a reaction between the VRT a freind gave me and the 303 Aerospace Protectant I had been using for years. But now I see the white residue is only in spots and a reaction would have been all over. I did get some tape release from the VRT and this is probably where some wax got through.

Thanks Guy's, will do this weekend.

Got some wax, Americana, on the rubber around rear glass and on the plastic cowl in front of windsheild. What are my options to remove?

Think I'll give it a go on a 2x2 area and see what I get, thanks all.

Can I use my SHR, FMP and MSS on a fiberglass boat with the Porter Cable?

Edit, this is a fishing boat, not a chick boat so 90% is good.

Not easy to get a good picture, this is with macro on cell phone. About 2 inches from paint.

I have etching on my hood, this weekend I used SSR, SHR, FMSS, with my Porter Cable. Got 93% of them but a few were a little to deep. How can I know a stop go no further point so I don't eat off all my clear. Car is a 2010 Velocity Yellow Corvette.