dfettero

I Graphene Ceramic Coated my 2020  C8 Corvette a year ago and it looks and behaves superbly.  I have a heated garage and over the winter would

like to "boost", "refresh", or enhance (you pick the word) the finish.  Is it necessary and if so what product should I use?

I have been looking for an economical rolling wheel detailing stand for a while.  Thanks for the product. 

You should include a small washer to go on the head of the bolt that goes inside the rubber feet. (or maybe bigger rubber feet)

Any movement of the stand causes the rubber feet to pull off the bolt.  A washer would prevent that from happening.  

For ease of assembly the print size on the instructions should be a bigger font.

As I wait patiently (or not so for months) for my new Torch Red C8 Corvette it would be great to see an article on new car detailing.

I have the 15 and 21 mm swirl killers.  The Torch Red reveal car just pops.

What about the interior?  Most leathers are coated.

I have an unopened bottle of the 9H ceramic

coating I bought at Carlisle last year.  If I remember the videos

it was OK to use ceramic boost after overnight cure.

Yes, no,  other?

What is the best drying aid for a ceramic coated car?

Is the  Matt Detailer a good alternative to Detail Spray for a quick wipe down on ceramic coatings as opposed to using Ceramic Boost every time?

How does one restoring that rich, deep warm carnuba wax tone on a ceramic coated vehicle?

What is the Impact of Humidity on Ceramic Coatings in terms of drying time?

Is there an acceptable humidity range?

Is the White finishing polish and white pad good for polishing the black plastic like A  pillars and large rear black plastic bumper/fascia on a Corvette.

At Corvettes at Carlisle last year Adam suggested I use it to get rid of a nasty film on the outside of my windows that kept streaking.  It worked.

After tracking my Corvette I see a few spots where tire chunks have left black marks on the mirrors, behind front tires and in front of rear tires, the latter two protected by cleartastic film.  What's the best way to remove them?

Shout out to Adam:

I met Adam at the booth and asked about cleaning stubborn windows.  Despite the new towels and glass cleaner I just couldn't get rid of the streaks.  Adam suggested using the H20 Guard and Gloss (with its petroleum product components) on the windows to remove any road film.   It worked like a champ!

Thanks Adam

Dean

My issue with the adjustable nozzle is that I barely open mine  (about 1/2 a turn) to get a spray and if opened much more than that its a full stream.

Just barely twist the tip!

The 32 oz spray bottle nozzle is more conducive to a stream rather than a spray. Has anyone else experienced this?

This time of the year in Northern Virginia (and lots of places) even a quick trip leaves the vehicle covered in yellow pollen.

What's the best detail product to use 1) remove the pollen; 2) provide some antistatic protection?

The power windows on my Rav 4 were freezing shut here in N. VA. In & Out Spray on the rubber seals removed the moisture and lubricated them. No more frozen shut windows.

OK here it is with my daughter an LA Model.  70 degrees on Christmas day in VA.

New from VA.  Eager to learn how to keep my 2016 C7 Corvette clean and showroom shining.

70 degrees on Christmas Day.  My daughter, an LA model showing off the car.