frefenhofer

It was time to do a full detail, and after reading some write-ups from the forum I decided to try some new techniques.  As I have not yet purchased a DA polisher I could only hand polish with Revive. I am fairly new to the forum, and have not been detailing for too long, so if you have any suggestions I would greatly appreciate reading them.
 
Adamizing Process
1.)  Clean the exhaust tips with APC and an assortment of brushes.
2.)  Clean the tires, and wheel wells with APC.  Then clean the rims with Wheel Cleaner (don't forget to move the car a few feet and clean behind the calipers).
3.)  Get your two buckets method ready, using 2oz. of APC and 4oz. of Car Shampoo.  Then rinse the car off and begin washing.
4.)  Without rinsing the vehicle, begin clay bar treatment with Detail Spray.
5.)  Rinse of the vehicle, and then wipe down with a wash pad and a 1:1 dilution of APC.
6.)  Rinse the vehicle down again, and dry with the Great White Drying Towel (don't use G&G or DS).
7.)  Apply Glass Sealant to the windows.
8.)  Apply SVRT to trim.
9.)  Apply Tire Shine to the tires with the Hex Grip applicator.
10.)  Polish the paint and headlights, I used Revive and did this step by hand.
11.)  Wipe down the vehicle with a Single Soft Towel and a 1:1 dilution of isopropyl alcohol (this step is awesome, you can see the polish that was left on your paint).  Avoid the windows, wouldn't want to strip the Glass Sealant.
12.)  Apply Liquid Paint Sealant, I also did this by hand with a microfiber applicator pad, also applying to the rims.
13.)  Allow LPS to cure, it was quite a humid Florida day, so I let it cure for an hour.
14.)  Remove the sealant, wait another hour, and then apply Buttery Wet Wax.
 
I'll do the interior tomorrow.  Here are the results.

Thanks to all for the warm welcome, I woke up early to beat this rainy Florida weekend, and used all my new stuff I just ordered from Adam's.  Very impressed with the glass sealant.  If anyone has any suggestions on good topics to look at I would love to know.