MrRaspberryJam

Thank you guys for all the input! I’m going to remember all of this next time I’m at a job site I never thought of using steel wool. I think I might start bringing a small bottle of Dawn with me and add a little bit to my wash bucket to degrease then whole car before waxing or sealing 

Every once and awhile I run across this issue on some of my customers cars and for some reason i can’t figure out how to fix it. This is after washing and claying and even after using a little spray wax but no luck. TIA

Just wondering if Adams will be at any Good Guys car shows this year? More specifically in Pleasanton CA at the fairgrounds 

47 minutes ago, falcaineer said:

 

Do you have everything in the kit? If so, sandpaper shouldn't be needed. Why do you think it will be?

Yes I have everything in the kit I’m just assuming I’ll need it since his headlights have never been buffed & I’ve had times where I couldn’t get full clarity with the kit alone 

I’m about to break out my Adams headlight kit for my friends 99 Accord and I’m afraid I’ll need some sandpaper as well and I’ve heard to use everything from 600 grit to 1500-2000 just wondering if anyone can really set the record straight 

TIA

21 minutes ago, tlbullet said:

There was definatley a post on this.  U need an adapter that was avail at HD.  Easy fix i believe.    Did u search the forum? I had the page saved but cant find it right now.  

 

 ******Found it..type in “sun joe + foam cannon” in the search bar.  

   First posted March 18’.

 

 Falcaineer...u need to teach me how to cut n paste the article!!!  

Honestly no I was lazy and just made a new post lol I appreciate it though I’m gonna get one 

Just picked up a sun joe pressure washer a few months back and I’ve been dying to get Adams foam cannon & snub nose handle combo but they won’t connect out of the box, has anyone tried that before or what should I use? TIA

I’m sure this is a pretty controversial topic so I’m gonna go ahead and open that can of worms anyway lol I’m a professional detailer and I’m sure, just like everybody else, going against pet hair is always a PIA. I just wanna know what’s everybody’s secret for removing it from cloth seats? I’ve tried everything from tape to a lint roller to a brush “meant for dog hair” and nothing seems to work 

Thank you all for the tips. I’m definitely trying some tomorrow when I wash my car ??

I’ve never had luck with cleaning windows. No matter what towel or chemical I use I always end up with streaks. Tried everything from basic cleaner and towel to brilliant glaze and sealant 

Maybe I’ll give it a shot some day. Main reason I ask is because I do detailing for a living and was just brainstorming ways to cut down on a job time to maximize profit and efficiency 

Just wondering if anyone has ever tried diluting buttery wax or glaze and putting in a spray bottle? I was pondering ways to shorten my detail time and that was one of my ideas 

I’m not hating on Adams whatsoever, I use them 100% for my detailing business I just can’t quite pull the trigger on spending $40 on metal polish. For some reason that’s just holding me back. 

4 hours ago, LSX Maestro said:

You applied it to a wet car or with the "dry method"? Reason I ask is I've found the "dry method" to not work very well, or at least easily, on black.  If I'm not doing it after the car is wet/after a wash, I will use a spray bottle with water, mist a panel, and then follow the directions for the "dry method" on that panel, repeat for the rest of the vehicle. IMO this works better than the wet method which completely saturates the towels with water/disperses more H2O, and better than the dry method which can get tough to do.  Try it all ways and find which one you like best. 

I applied using the wet method and surprisingly it was in a garage. The areas with the worst streaks were actually in the shade too

I’ve been thinking about just washing it with soap again but the glaze sounds like a good idea. It makes sense I did use a lot plus it was hot outside on black paint so I’m sure that didn’t match up either 

So last night I used Adams H2O g&g for the first time, only problem is I’ve had that bottle sitting on my shelf for well over a year. After using it on the paint it left nothing but streaks and what I would compare grease marks to. I just need to know how to get this stuff off so the marks and streaks will go away

TIA

Surprised this hasn’t happened more to anybody else. So far irs not a huge deal 

Lately a few of my towels have been curling like this it’s mostly been my blue glass towels but this is the first time I’ve seen a microfiber do it. Anything I’m doing wrong?

I’m gonna be relocating to Winter Park hopefully later this year! Coming all the way from California lol

2 hours ago, mathews31 said:

Would you trade for the EAPC

Yes

Still have this available guys

Trying to get rid of this gallon I’ve had for awhile. Willing to trade for a gallon of either tire shine, wheel cleaner or APC. DM me or text me 9256675257

thank you!

Just wondering if anybody happens to have this hoodie willing to sell or even trade? Missed out on it before

I have a gallon of H2O guard and gloss plus a used bottle of super vrt (about 80% left)

i think I also have a few other things like revive hand polish or waterless wash just no pictures at the moment. Let me know what you got 

Still have the gallon available