-
Posts
229 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Downloads
Events
Posts posted by FASN8N
-
-
Extremely nice looking pictures...
DCRANER
You should get wheel locks on your tires.
The vette wheels and tires cost approx. $2,000 each.
Nice job on the detail
Wow, $2k for each wheel? If they are ever stolen, you could buy a nice set of HRE's with tires for less money as a replacement!
-
Define anything?
Detail related?
Car shows?
-
i dont put anything on the tires because a few people have told me that your tires will absorb tire shine and similar products into the rubber and make them slicker therefore resulting in my viper ending up in a tree
I might believe this if you just finished detailing the car and the tires had tire shine all over the tread. You may incur some slip and slide in the first few miles, but this would quickly wear off.
Adam's VRT comes off after driving through a good rain or from a light scrubbing with soap and water. I don't think it is strong enough to bond with or penetrate your tires though.
I think most vipers end up in trees due to driver inexperience (mainly from the lack of ABS or traction control) instead of detail products used.
-
The paint looks great, but it looks naked w/o any VRT on the tires!
-
Lojak just tells you were your stolen and stripped car is
Go with a Clifford Avant Guard system
http://www.clifford.com/Products/Product.aspx?ProductID=719
About the only way to steal a car equipped with this setup is with a tow truck or flat bed.
-
Great looking car.
I just went to FL with my brother to pick up his 07 G35 Sedan, what a fun car to drive
-
E63/E55's are sweet!
-
Nick,
The Lex is looking great!
-
Nice job, I like the center lights on the Mustang.
-
Send all unwanted water to Lake Lanier please!
-
What about the Pontiac Aztek?
-
Whoooa! I'd hold off on that stuff, and try a little rubbing alcohol on a mf towel. Do a very small are first, then continue.
Please take before, during, and after photos!
Thanks.
Adam,
You would be amazed at what the scrubbing bubbles will take care of. I have used this stuff for 15 years and it has never failed me, even on the toughest stains.
-
We have a winner
:thumbsup::thumbsup:
-
My friend got black ink on his new black cloth seats. I haven't seen it yet but even though it's black on black I'm sure it still stands out like a sore thumb. Is there anyway to get this out? If it's anything like what I've been reading about the leather it seems there may be little hope.
Look at post #9
As with anything try a small area first (even though I have never had any trouble with the DOW scrubbing bubbles removing the color from interior surfaces)
-
The Dow bathroom cleaner with scrubbing bubbles works wonders on carpet, seats, etc.
Slightly dampen the area that needs cleaning with water
Spray area with scrubbing bubbles and let it sit for about a minute
Use a soft bristled brush to scrub the area and then use a soft towel to dry
-
I left you a bunch of 5 star ratings. All great stuff!
-
any pics of the red shirt?
-
Nice job on the detail, makes me miss my old Dinan S2 540/6
I don't miss the maintenance bills of owing a BMW though!
-
Looks great!
Don't get me wrong, VRT is one of my favorite Adam's products.
-
Holy thrashed paint!
Nice work
-
I have to say I was a bit skeptical about the green wheel cleaner since I have been using Eagle One A-Z all finish wheel cleaner for about the past 15 years with nothing else coming close.
After watching the video about the Powerstick I thought I would order one and give it a try to go along with my new green wheel cleaner and boar's hair wheel brush.
I tried all three new products over the weekend and I am nothing short of blown away by how much time and effort these new products saved me.
No more cutting my hands trying to clean the inside of the wheels or having irritated skin (or burning if you get some cleaner in a cut!) from a harsh cleaner
I also really like the boar's hair brush. It does a good job of getting in the crevices and wheel lug area
I would estimate that I cut my wheel/tire cleaning time by 50%
Thanks again Adam's!
-
This is probably necessary if you are using a high speed rotary buffer and want to avoid burning moldings, slinging product, or tearing up emblems
This should not be a problem for most PC or orbital buffer users though
-
I used some diluted VRT on my engine bay for the hard to reach places and was very happy with the outcome
-
Welcome!
2009 has been good to us....
in General Detailing Discussion and Questions
Posted
I just used mine again last night (with the Powerstick) and was thinking the same thing.