How Long Before Removing MSW?

[MburgWVDetailer]

I know this is probably already on the board but I already started waxing. I am doing my first full detail with Adam's products and I do not know how long to leave the wax on before removing. I know some waxes have to haze, but I have no clue with MSW. Can I remove right after applying or do I need to let it sit for a while? Thanks.

[Chris@Adams]

Allow to cure for about 20 min. if humid or cold it may take a little longer. Wait 12 hrs. and re -wipe.If oily residue exists after removal mist with DS then re-wipe the finish.

[DanFish]

Read the back of the bottle, I believe it says 20 minutes maybe a little longer depending on humidity and weather conditions. I generally leave it on for 20-30mins, be sure to wipe it down with some DS about 12 hours later to get the last of the residue off! Good luck!

[MburgWVDetailer]

I forgot to look at the directions on the bottle. It's hot and I'm losing it. Thanks guys.

[Chris@Adams]

Read the back of the bottle, I believe it says 20 minutes maybe a little longer depending on humidity and weather conditions. I generally leave it on for 20-30mins, be sure to wipe it down with some DS about 12 hours later to get the last of the residue off! Good luck!

Good answer Dan!:thumbsup:

[Chris@Adams]

I forgot to look at the directions on the bottle. It's hot and I'm losing it. Thanks guys.

 

No problem Jared!

[DanFish]

Good answer Dan!:thumbsup:

 

haha, way to beat me to the punch!