Microfiber with PC

[DUKE-Z]

I wondered what you all think of using a microfiber machine buffing after waxing? I did the advised detail steps, but put a final coat of wax on, then used an Adams Red pad resting on top of an Adams Microfiber towel to buff the wax more. I've seen folks use terry cloth bonnets and wool buffing pads in the past, but haven't seen this mentioned on these forums. Is it a wasted step? It looked great!

[redneck08sierra]

I want to say in one of the older adams videos, Adam used a MF towel to take off the wax...maybe vol 6 or 7

[Chewy]

Adam used to do this with MSS and a PC because it can be a PITB to remove.  I don't see a huge issue, other than too much will probably remove the LSP.  

 

DO NOT try this with a Flex or rotary tool.  

[MrHot88]

I use it on every wax job I do.

Really helps in removing the product, looks cool too:)

Use the softest MFT you have.

 

Kevin

[carlrx7]

I'd like to see a video of someone doing this.

[ksell87]

Forward to about 12:15

[TR6speed]

I have always removed Swirl & Haze Remover, Fine Machine Polish and Brilliant glaze with the microfiber towel and pc. I remove the American by hand. I learned that from Adam years ago. In fact at that time he only has Revive polish and Buttery Wax. I just continued the same process with the newer products.