-
Posts
23,782 -
Joined
-
Last visited
-
Days Won
74
Content Type
Profiles
Forums
Gallery
Blogs
Downloads
Events
Posts posted by Chris@Adams
-
-
If you don’t care about the hydrophobic qualities of the Ceramic coating you can use the Americana. I personally wouldn’t, two different families one SI02 and the other carnauba.
-
Welcome to our forum!
-
-
-
Welcome to our forum!
-
I always wipe - level first with the Suede Micro Fiber towel then I wipe with a Utility Micro Fiber followed by a Single Soft Micro Fiber.
Doing this seems to cut way down on high spots. Make sure you pay attention to all panel gaps. If you do miss a area and have a high spot use a small amount Ceramic Spray to go over the high spots. Hope this helps.
-
That is pretty cool!
-
I always had good luck using our TAR and a plastic razor blade.
https://adamspolishes.com/products/adams-tar?_pos=1&_sid=c2cc113bf&_ss=r
-
Welcome Gian!
-
Welcome to our forum!
-
Welcome Paula!
-
Welcome to our forum!
These wheel brushes do a great job on your barrels.
https://adamspolishes.com/collections/exterior-wheel-tire-brushes
-
On 8/24/2021 at 9:02 AM, gred1987 said:
I used the porter cable random orbital machine.
I wouldn't think that you could have burn through with the PC.
-
Did you use a machine or by hand?
-
TAR is a great choice, if you don't have any you can use also the top solvent (before shaking) of Brilliant Glaze.
-
The CS3 will help maintain your Graphene Spray Coating to make it even last longer.
-
Yes the first instructions said no need to level, but I thought they changed & updated the instructions.
I wish you could have read my earlier post in this thread were I told everyone to always level to be on the safe side. Believe me I feel for you, at first I did the same thing with similar results.
-
Did you level the coating on your trim after applying same as your paint?
-
Welcome to our forum!
-
-
-
Looking good Jack!
-
Welcome to our forum!
-
If the Water Spot Remover doesn't work you may have to Machine polish to remove them, it all really depends how long they have been on your paint.
Paste wax over existing ceramic
in Exterior Protection & Enhancement
Posted
Have you tried CS3 or Graphene Detail Spray? You can use the as a quick Detailer or as a drying aid. They will both add pop & help maintain your coating.