removing swirls on clearcoat wheels

[Skinytall]

was wondering any tips or ideas on how to remove swirl marks on my wheels. they're factory SRT wheels they look chrome but i think they must have a clear coat on them because if you try metal polish no residue shows up.they have a nice shine only problem is when the sun hits them you see swirl marks on them.

[Marylander]

Try the same steps as you would for paint, starting with the least aggressive products first and then working your way up, if needed. I'd start with Revive, then go to SHR and then SSR.

[Skinytall]

Thanks for the tip.will try it out this weekend!

[camaro2ssblack]

your going to need a drill and focus pads to get any significant improvement.

[Marylander]

your going to need a drill and focus pads to get any significant improvement.

 

Well, maybe... I've found that revive on an orange hex pad can do some decent cutting if pure really going after a small area with a bit of effort. It's worth a shotto try it by hand first.

[Skinytall]

I have the focus pads,ill try it by hand first & if no change ill move on the the focus pads.

[Chase@InsanePaint]

your going to need a drill and focus pads to get any significant improvement.

 

This^^ !! Drill, 4" pads, FMP, and a sunny afternoon. Then IPA wipedown, followed by a good coat of quick sealant!!! Ask me how I know.....(see cars in sig, lol)