I am preparing in the coming weeks to do a full detail on my Volvo XC90 nd wanted to ensure I am following the correct sequence of steps. I have the following products:
1. Surface Prep
2. Car soap foamer (for a power washer)
3. Graphene Glass coating
4. Graphene Ceramic Coating (advanced)
5. Graphene Boost
6. Graphene Ceramic spray coating
7. Clay bar
8. Clay Mitt
9. Lots of microfiber towels
10. Graphene sponge for spreading liquid
11. A gallon of detail liquid (pink)
12. Iron remover
13. Ceramic car wax
14. Scratch and swirl remover
15. Hexagon orange application sponge
Can one of the experts please offer the correct steps to ensure the correct sequence?
Here is what I believe is correct:
1. Wash car using foaming car shampoo
2. Dry with towels. Finish drying with detail spray (pink) and microfiber towels.
3. Apply Iron remover - wait 5 minutes and rinse off.
4. Apply clay-bar with detail spray working in small 3x3 foot areas. Buff off with microfiber towel.
5. Apply scratch & swirl remover using orange hexagon applicator, working in 3x3 foot sections. Wait for 2-3 minutes.
6. Buff off swirl remover with microfiber towels
7. Apply ceramic wax working one panel at a time. Wait for haze and buff off with microfiber towels.
8. Apply surface prep one panel at a time and dry off with microfiber towels.
9. Apply Graphene Ceramic coating using applicator sponge in small sections 3x3 foot. Wait for rainbow haze. Buff off with microfiber towels.
10. Apply Graphene Glass coating one window at a time. Wait for rainbow haze and buff off with microfiber towel.
Question
chrisdlove
Hello Adam's Forum,
I am preparing in the coming weeks to do a full detail on my Volvo XC90 nd wanted to ensure I am following the correct sequence of steps. I have the following products:
1. Surface Prep
2. Car soap foamer (for a power washer)
3. Graphene Glass coating
4. Graphene Ceramic Coating (advanced)
5. Graphene Boost
6. Graphene Ceramic spray coating
7. Clay bar
8. Clay Mitt
9. Lots of microfiber towels
10. Graphene sponge for spreading liquid
11. A gallon of detail liquid (pink)
12. Iron remover
13. Ceramic car wax
14. Scratch and swirl remover
15. Hexagon orange application sponge
Can one of the experts please offer the correct steps to ensure the correct sequence?
Here is what I believe is correct:
1. Wash car using foaming car shampoo
2. Dry with towels. Finish drying with detail spray (pink) and microfiber towels.
3. Apply Iron remover - wait 5 minutes and rinse off.
4. Apply clay-bar with detail spray working in small 3x3 foot areas. Buff off with microfiber towel.
5. Apply scratch & swirl remover using orange hexagon applicator, working in 3x3 foot sections. Wait for 2-3 minutes.
6. Buff off swirl remover with microfiber towels
7. Apply ceramic wax working one panel at a time. Wait for haze and buff off with microfiber towels.
8. Apply surface prep one panel at a time and dry off with microfiber towels.
9. Apply Graphene Ceramic coating using applicator sponge in small sections 3x3 foot. Wait for rainbow haze. Buff off with microfiber towels.
10. Apply Graphene Glass coating one window at a time. Wait for rainbow haze and buff off with microfiber towel.
11. Enjoy car :)
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now