Wy_detailing
Members-
Posts
425 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Gallery
Blogs
Downloads
Events
Everything posted by Wy_detailing
-
Hey guys, I’ve got an unopened gallon of last years pumpkin spice I won’t be using, I’ve got another gallon and one if this years. Anybody need it? I’ve also got the following. 1 interior detailer 2 buttery wax 2 brilliant glaze Chocolate mint detail spray Wash wedge 4 adams buttons Leather conditioner Revive hand polish Clay impression tool Americana applicator Patriot wax applicator Looking for clay, strip wash, single softs, new microfiber pads, grey applicators, ceramic coating applicators, truck brush, air fresheners, new paint sealant, old APC, lugnut brush and glass sealant
-
limited run Quick Sealant?
Wy_detailing replied to JHL88's question in Exterior Protection & Enhancement
I think it was discontinued because of VOC regulations. I’ve got a can I use from time to time, great for wheels -
Paint sealant over wax
Wy_detailing replied to ShaneB's question in General Detailing Discussion and Questions
If you are going to apply a sealant be sure to do it under the wax. You want the sealant to get the best bond with the paint as it can to have the best result, so to do so you apply it to the “naked” paint after you have strip washed, and clayed the car. Then follow that with brilliant glaze and finished with the wax. The paint sealant gives some really good shine, and the glaze on top of that even more. And when you do all three together you get the most protection and the best shine possible. Hope what helps! -
Paint Coating | FAQ's | Discussion
Wy_detailing replied to Dan@Adams's question in Exterior Protection & Enhancement
I wiped the whole truck down with the prep them I did my coating and found that to be very easy. No mixing up towels between prep and the coating, and only 1 step at a time to keep it simple -
Removing paint correction polish
Wy_detailing replied to aclass's question in Paint Correction & Polishing
I had that same issue. The orange correction polish has a diminishing abrasive in it. The more you polish, the more the compound breaks down and the glossier the paint gets. Try working the project for a longer period of time, them try wiping it off, that's what helped me -
New Products
Wy_detailing replied to frosty350's topic in Product Polls, Feedback, and Company Input
I've got a 16oz bottle of correcting and finishing polish, I got it from my local dealer not the website though. I would love to see the whole polish lineup in 16oz bottles!! -
-
Hey Guys, I'm looking at getting a new car but was wondering if anybody could here does photoshop and could photoshop some new wheels on the car for me? I have all the pictures just wanted to check to see if anybody could do it first, thanks!
-
First Timer from Wash to Wax
Wy_detailing replied to dpeck's question in General Detailing Discussion and Questions
And glaze after sealant as you want to paint sealant on "naked paint" to get the most protection and for it to last the longest -
First Timer from Wash to Wax
Wy_detailing replied to dpeck's question in General Detailing Discussion and Questions
Just be sure to switch pads between products. I personally like to clay, finish polish with white pad, revive by hand, paint sealant with grey and buttery with grey. Revive is more of a "pre wax cleaner" rather than a polish, and I like to do it by hand as it will turn the white pad blue as will the buttery wax will turn the white pad yellow, which is why I use the grey for that. -
Distrubtors of Adams products?
Wy_detailing replied to Mbrazelton's topic in Product Polls, Feedback, and Company Input
I've got a pretty awesome dealer, he covers the shipping cost and gives me 15% off. I've been working with him from the begging of my Adam's obsession and he always takes care of me -
Hey guys, I'm getting everything lined up to do a full detail and complete ceramic coating on my soon to be new car. Planning on doing all three ceramic kits and just looking for a few answers. 1. Can I ceramic coat the headlights/taillight after polishing them? Paint coating or trim coating for these? 2. Trim coating or paint coating for gloss black plastic trim? 3. Can I use the small foam swabs that Adam's sells to do tight spaces on the wheels and grill? 4. The car (2016 dart GT) has red leather perforated seat bolsters that look like they are died blac. I've seen a few cars where it wears down to red after lots of use. Is Adam's leather co dirioner enough to protect it or should I look at a higher strength leather sealant/protectant to prevent wear. 5. Is trim coating ok to use on Weather Tech Floor Mats? 6. Should I do an iron decon on the paint or just clay? Good practice to do so on a new car with possible rail dust? 7. Any tips for protecting wiper arms from fading? Polish and paint coating? 8. Anybody done trim coating on the inner fenders? Was it worth it or should I stick to undercarriage spray? Thanks in advance guys!
-
Swirl Killer intermittently working need help!
Wy_detailing replied to philhibner's question in Paint Correction & Polishing
I had an issue like that, I sent dan an email and I got a return label for my old one and they sent me a new one! Adams amazing customer service for the win! -
Adam's Ultimate Kit
Wy_detailing replied to Wy_detailing's topic in Product Polls, Feedback, and Company Input
-
Had anybody else seen this?? I wish it was there when I got started with Adam's, this is awesome and at a great price!! Now we just need an Adam's Uktimate Gallon package ????
-
I would trade for the following, buyer pays shipping for the washer Ceramic wheel coating Ceramic paint coating New 5.5in or 4in pads VRT gallon **Really need this one** Rinseless gallon Tire and Rubber cleaner gallon Heavy correction polish Orange Correcting polish Sidekick blaster
-
I'm in Canby Oregon. Looking to sell only right now
-
Sorry I have 4 patriot at and 3 Americans
-
I got this a while back, only used it once so I'm hoping somebody can put it to use! These retail from $125-$165, is like to get $85 plus shipping. Thanks guys
-
Swirl killer pads
Wy_detailing replied to Mariner's topic in Product Polls, Feedback, and Company Input
I had a few fail too, I emailed Adams and they sent me brand new ones to replace them free of charge -
Another new product coming soon?
Wy_detailing replied to Wy_detailing's topic in Product Polls, Feedback, and Company Input