Chris@Adams

You should be okay using your WW for claying, you will know for sure if you need to use more product if your Clay starts sticking. No it will not leave anything that Surface Prep won’t take care of.

http://www.adamspolishes.com/

It should last a few years, the main thing is keep it stored in climate controlled location. All of your products as far as that goes should be stored not below 45* and not above 85*.

Looks like you have clear coat failure, if that's the case you would have to have them re-finished. Thoughts?

Welcome to our forum!

The same goes for Graphene just as mentioned above about Ceramic Coating.

http://www.adamspolishes.com/ Graphene Detail Spray™ is modeled after our most iconic and versatile product, Adam’s Detail Spray! Simply spray and wipe for a streak free, brilliant finish which now also provides additional slickness, gloss, depth of color and relentless water beading all its own. Due to the unique nature of graphene-oxide, we are able to formulate the same resins contained in our Graphene Ceramic Coating™ and Graphene Ceramic Spray Coating™ directly into water-based systems, such as our Adam’s Detail Spray! This added functionality allows Graphene Detail Spray™ to universally extend the life of any of our waxes, sealants and even coatings or be utilized as its own form of stand-alone protection. Unlike Adam's CS3, Graphene Detail Spray™ is designed to work best on a clean, freshly washed surface and is not intended to act as a type of waterless wash. Enhance Gloss, Slickness & Depth of Color Generates a Highly Hydrophobic Surface Extends the Protection of Waxes, Sealants & Coatings Easy, Streak Free Finish – Safe on All Surfaces

That’s great, better option for sure.

Prayers indeed. Any update?

Welcome to our forum! I think I would go with our Ceramic Liquid Wax, it will last twice as long as Carnauba wax & very easy to apply and remove.. I would at least find shade to apply. https://adamspolishes.com/collections/ceramic-sio2-infused-products/products/ceramic-liquid-wax

Looking good!

Welcome to our forum!

Welcome Matt!

Agreed, no need to wait go for it!

I scrubbed my plastic on my bumper for probably a hour. I used APC, Trim Cleaner & dish washing liquid. I used my SK Micro with the brush to do most of the cleaning. Good news I got 99% off, be patient it will clean off.

This info (#3) is incorrect and needs change, I have brought it to the teams attention. Thank you.

Yes that's exactly what happened, on trim you must wipe and level just like on paint. I did a little test on my truck bumper to see what would happen if I didn't wipe off the Graphene, and yes it turned white-grey too. I plan on working on it this weekend and will let you know what happens. Here's the instructions from the site. Instructions for Plastic Trim & Headlights: Prepare your plastic trim or headlights by using the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. For heavily contaminated plastic trim or headlights, we recommend a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel. Open the coating bottle and begin by dispensing numerous drops of the liquid onto the supplied Micro Silk applicator to sufficiently wet it. Work the product into the surface, ensuring full coverage over the desired area, using cross hatching motions and overlapping your previous pass by 25-50%. Since the product is being applied to a porous surface, you will not see a rainbow/ flashing effect - the immediate color change of the plastic or trim will reveal where the product has been applied. However, you are also able to utilize the Adam’s UV Flashlight for inspections where desired. Once the recently applied product has penetrated, begin leveling the coating, applying minimal pressure to the towel in the process. Wipe down in a similar cross hatch pattern as applied, switching/flipping the towel periodically to use a new face to fully level the coating. Once fully leveled, allow the coating to fully cure for 24 hours, free from water, elements, or weathering.

Welcome Matt!

Welcome to our forum!

Welcome Terri!

Why not use either our Ceramic Spray Coating or our new Graphene Ceramic Spray Coating? It's easier to apply and it will out last any wax many times over. https://adamspolishes.com/collections/ceramics-graphene-graphene-ceramic-spray-coating™

I agree, you could Boost and then just maintain with Wash + Coat, CS3 & Ceramic Waterless Wash to name a few.

I vote for the Graphene Coating too.

Welcome Randy!

Welcome to our forum!