Ironterp

Can CS3 be used post wash similar to H2O G&G or does the vehicle have to be dry? 

Great thanks

One other thing, the ceramic kit comes with a 4 oz bottle of the coating prep will that be enough to do my whole truck?

2 hours ago, Yo-Yo Ma's Cousin said:

The below is from the product details and FAQ's for the new UV coating

 

(It states instructions for plastic and trim)

 

“What can I use this on? Can I just use this on the whole car?”Adam’s UV Ceramic Paint Coating provides protection to an extreme range of areas on your vehicle. Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components,Headlights, Bed liners, Tonneau covers, Canvas tops, Floor mats— All are safe to be protected.

 

 

For Use on Paint: 

Step 1: Remove the 4oz bottle of Adam’s Surface Prep and supplied Towel and fold towel into fourths. Prepare your paint and use the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For optimal results, users must Wash, Clay/Decontaminate, and Polish their paint for best results.

Step 2: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open and begin to dispense the coating onto the supplied Micro Silk applicator and begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. Cross hatching motions are favored during this process and overlapping your previous pass by 50%. During your time between passes, utilize Adam’s UV Handheld light for inspections. Take note of between the body lines, bumper areas, mirror caps, and commonly missed areas on your vehicle. To ensure a thorough application, the light should shine and reveal an even and consistent bluish hue of light. If you notice streaking in the surfaces, level out with additional product and the used Micro Silk applicator. 

Step 3: To begin the removal process, remove 1 of the supplied coating removal towels from the packaging and fold the towel into fourths. Begin wiping the coating and applying minimal pressure to the towel. Once fully removed, allow the coating to fully cure for 24 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once fully cured, you’re free to enjoy the open road and have coated, perfected paint no matter how harsh the conditions.

 

Step 4 (Optional): To give your coating that extra pop after application, spray Adam’s Ceramic Boost to the coating to top the coating with an added layer of silica enhancement. Apply as needed.

 

For Use on Plastic & Trim:

Step 1: Remove the 4oz bottle of Adam’s Surface Prep and supplied Edgeless Utility Towel and fold towel into fourths. Prepare your trim and use the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For heavily contaminated trim and plastic, we recommend a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel.

Step 2: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open and open the bottle and begin dispensing the chemical onto the supplied micro silk applicator to begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. Since the product is being applied to a porous plastic surface, you will not see a rainbow/ flashing effect— the immediate color change of the plastic or trim will reveal where the product has been applied.

Step 3: Allow coating to fully cure for 1-2 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once cured, you’re free to enjoy the open road and have clean, dressed plastic & trim no matter how harsh the conditions.

Thanks I didn't realize it was safe for trim I must have been reading information about the former paint coating

I'm a fist time user of ceramics and wondering which would be a better fit for my application. The vehicle will be a new 2019 F 250 that's black. It is my daily driver and will be subjected to gravel driveways, driving in the snow, and jobsite conditions.

I know that the ceramic paint coating is thicker with a longer lifespan but I have a couple questions.

The ceramic paint coating cannot get on the trim and glass from what I've read. I will not be using ceramic trim coating or ceramic glass coating I don't want to purchase and work with 3 different products. 

Should I use cpc on all the paint and use csc on the trim and glass? If so, how would you approach applying them? Can you do one and move right on to the other? 

Should I just use csc on the whole truck or would I be sacrificing a noticeable amount of protection from light scratching etc?

I'm not as concerned with longevity more so the durability. Also fyi I have both products so that's not a factor.

Thanks in  advance

Picking up a new F250 this week and with winter coming obviously I'd like some protection via wax or sealant. The truck is a new build and just hit the lot two days ago. Is it ok to use a LSP? I know it's recommended not to right away with fresh paint from the body shop but I wasn't sure if new from the factory was different. Thanks

Looks great thanks for sharing

1 hour ago, Nickfire20 said:

Fyi  I recently contacted Rich Schmidt,  he advised he is an artist for Adams, and not a dealer and does not carry products.  He further stated he has no idea why his info is on the website.

Good to know thanks 

11 hours ago, Rich said:

There are several Adam's dealers in Md.  but not sure how close they are to you.  But they may be able to refer you to someone if they can't or don't detail cars themselves.  

Rich Schmidt (8.97 mi )

(1)240-418-4575

rich@fatcat-creative.com

14 Farsta Ct.,

Rockville, Maryland ,

United States, 20850

 

Darryl Nichols (20.67 mi )

(1)703-675-8819

email@oddsandendsdetailing.com

112 Oakgrove Rd. STE 111,

Sterling, Virginia ,

United States, 20166

 

Frank Walker (28.3 mi )

(1)410-963-1896

frank@mergetechnologyinc.com

8609 Glen Hannah Ct,

Windsor Mill, Maryland ,

United States, 21244

 

 

Thanks I will try to contact one of these guys.

It's a diesel with an extended cab and short bed. Everyone has either crew cab with short bed or extended cab with a long bed. Throw in the gray color and it's 1 of 1 in this region

Just picked up my new 2018 powerstroke! I bought it from a dealer in PA because the specs on it are a little rare and it was the only one on the east cost. Unfortunately I didn't have time to wait 8+ weeks to have one ordered. Anyway, we've had our fare share of snow this year and I'm assuming the dealership cleans the trucks off with a broom because this thing is hammered! Most notably the black b pillars have swirls that stick out like a sore thumb in any bit of sunlight. Are there any detailers or weekend warriors on here in the area that would be interested in doing a paint correction on this thing? i don't need a full detail, just paint correction only. Unfortunately with my work schedule and a shoulder issue, I can't handle the paint correcting portion right now. I have access to indoor shop or can bring it somewhere. I'm located on the eastern shore of Maryland. Thanks guys 

suweet!!  what rims are those and where did you get them?

They are Dropstar 645's. I ordered them online can't remember exactly where

That truck is gorgeous. If I had room for a new Silverado or Sierra, that is the exact color I want!

 

 

Thank you sir

Well most likely that last 2 bucket wash heading into colder weather. Most likely opt out for rinseless washes until spring now. Finished off with some HGG

Just bought myself a used honda ATV that's in really good shape for a good deal. However the plastic fairings have a fair amount of light scratches and deep swirls. I'm not extremely concerned about it because it's made to work and go off roading and I intend to do just that. However I would like to dress it up a bit and get rid of some of them if possible. Does anyone have experience with this? Can you even polish or buff plastic?

Secondly what should I coat them with? Wax, brilliant glaze, or vrt maybe? Interested to hear everyone's thoughts

Edit: I'm not really sure if they are clear coated or what to be exact maybe someone who knows more can chime in

I'll start by saying I love rinseless washing and it was a life saver through the rough winter we had. However, lately with the warmer temperatures and presence of dust/pollen, the dust/pollen seems to cling to my truck almost immediately post wash. I don't have this problem with a normal two bucket wash. I'm assuming the rinseless causes a little bit of static maybe? Anyway I'm just curious what would be a good last step product after rinseless washing to prevent this? Detail spray wiped down or brilliant glaze? Those would be my preferred options as I already have a layer of protection. Thanks

Just to clarify because it's been a while since I've brought out the machine, when you guys say 2 or 3 passes with a certain pad/product, do you mean working a panel until the polish flashes, and then applying more polish and repeating?

I have terrible luck with bugs. My front end has a layer of quick sealant and after a two bucket wash today using a pressure washer, I still did not get all the bugs completely removed.

Dewalts for me as well. Love the new 20v drills

Maybe they can add a video to the Adams series about paint decon? I don't have any experience doing it or know much about it and I'm sure I'm not the only one

I have a new silverado as well and Dylan is right. Those things are a pain in the rear to clean. Especially once they get debris stuck in them. Hard to get it out.

Got a chance to install my new tires and wheels and get her cleaned up today. Here's a few pics with the new shoes!

Sweet that makes things easier. Thanks guys

Finally got some new wheels and tires for my truck after being on back order for 6 weeks! The wheels are matte black finish so I'm going to put a coat of quick sealant on them before I put them on my truck. I'm wondering is it ok to put liquid paint sealant on the back of the wheels for a longer lasting and more durable protection? Also is it safe to pre clean them with my waterless mix made from rinseless? Thanks and I'll post up pics once they are on the truck

Looks really good!  Did you use your well water for the RW mix?

Yes I did and no problems, even though it doesn't really sit on the paint long enough to dry with the rinseless method, I still think the rinseless helps balance out the water