Wy_detailing

Talking with Dan he said to use the paint coating on headlights, piano black b-pillars, and the paint of course. 

I have a lead on one maybe two

Looking for a cinco de mayo detail spray to complete my complete collection of detail spray!! Have lots of extra to trade, willing to trade more expensive items as well, really want one!!

Check with Gary Parham in Damascus, he is one of the largest Adams dealers in the US and has just about every product 

I heard from my local dealer that their prices are increasing. Didn’t think t would be a $10 increase as it has been on some items though

You could try a diluted eco-APC. Even diluted the stiff foams up and cleans super well. 

No it will not remove iron. The wheel cleaner can be used as an iron remover straight up or mixed 1:1 with distilled water as well.

I have a new patriot, old patriot and new Americana for trade. Also have all four of the ASSC bottles for trade as well (glass cleaner, tire shine and two detail sprays). Looking for

Gallon tire and rubber cleaner 

Gallon detail spray 

Microfiber cutting pads (New)

Swirl killer or Rupes (21 or 15mm)

VRT 

Master Blaster

New foam cannon (red top)

Brilliant glaze! 

I do 4 dots on the pad, work it in for 2 min or so and then it is easy to remove. Be sure you are working the polish long enough to break it down. The orange correcting polish has diminishing abrasives in it, the longer you polish the more shine it adds. I also like to use the look of the polish to gauge how much product I need. It’s hard to explain, but I like to have enough so that the area I’m working looks almost like it has just been waxed (wax still on the paint). The product should spread evenly on the area your working and not have any “dry spots” if this happens I add a bit of polish, and I usually do not use much detail spray as it seams to clog the pad after time. Hope this helps

I coated my barrels and then had them balanced and had no issues with the weights. 

They did say they will come back with more later on in a less expensive container 

It’s here!

I see a 3 hour drive in my future!

I put all mine in a cabinet, still have open room to hold more but I just put them in a single row so I can see everything 

Add a few ounces of APC to a bucket of water and let the towels sit overnight, then wash with microfiber revitalizer! Should be good to go from there

Maybe a 3M adhesive removal wheel?

https://www.summitracing.com/parts/tes-07498?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-3m&gclid=Cj0KCQiA5aTUBRC2ARIsAPoPJk9pEbEsoqVNXK14bWFMDUEKVEsjDkKJBWqH5NpqdqVMKhpsk5KOJFQaAmlZEALw_wcB

I have used tire and rubber cleaner in a ton of rubber mats and never had an issue. Did you wash them off fully? It’s a strong product but I’ve never had an issue like that with it

Anybody have one for sale or trade?

My guess it a wax/boost type product for ceramic coating cars, looks like a nice aluminum container with an Adams A on the lid too! 

Just saw this on Adam’s Instagram page! Looks like a new paste wax, and the color of ceramic boost! Maybe a coralation between the two?? Also saw and other sneak leak at the new pro-line! 

I emailed Adam himself the other day about using detail spray and H20 guard and gloss after watching him apply it to his coating SUV in their winter washing video on YouTube. He said that neither product with affect the coatings water beading abilities or life of the coating. I was really surprised to hear this after always believing that the coating should not have any other products other than ceramic boost applied to it.

Start with the foam cannon and ultra foam shampoo or regular shampoo (your choice) then wash the car using the two bucket method. After you wash the car and while it is still wet, grab your detail spray and clay. Spray down an area with detail spray and clay the panel, the move around and clay the car. After you clay you can wash again or just rinse off the car. Then while the car is still wet after the final rinse use h20 guard and gloss with two microfiber towels and wet one towel down. Next, spray h2p guard and gloss on the panel, use the wet towel to spread the product and your other dry towel to buff off. Then stand back and enjoy the shine!