Tips and Tricks?

[teamcrossworks]

There used to be a section for this right? lol

 

Just something I do that may (or may not) be helpful to others...

 

I used to forget which can of In and Out Spray or Quick Sealant I was using and which were the brand new ones - since I stored them in the same cabinet. I now use a paper hole punch on the cap to make a small hole to identify which one I'm currently using. Simple yet effective!

 

 

[BluedogGMC]

There used to be a section for this right? lol

 

Just something I do that may (or may not) be helpful to others...

 

I used to forget which can of In and Out Spray or Quick Sealant I was using and which were the brand new ones - since I stored them in the same cabinet. I now use a paper hole punch on the cap to make a small hole to identify which one I'm currently using. Simple yet effective!

 

Colored rubber bands also work to mark cans.

[Rich]

Both are good ideas.

[pirahnah3]

AS I dont have QS I only have the one, but I am fairly good at keeping things in the same place, and all my chemicals are lined up along a shelf usually 3-4 deep lol. Just in case thou I have one cap labeled "In Use" done with a label maker. I can just keep using the same cap from can to can (Until Adams changes the can lol) but makes it easy to pick the right one. 

[Tim]

These work wonders also:

 

http://adamspolishes.com/adam-s-can-gun-1-pistol-grip-spray-tool.html?___SID=U

[chops1sc]

I made a post last year with a trick I use to clean/dress tires.

 

http://www.adamsforums.com/topic/28624-how-to-clean-dress-your-whole-sidewall/?do=findComment&comment=448438