ACRCAR Posted November 3, 2016 Share Posted November 3, 2016 Like the title states, I am looking for the BEST Adams recipe for black paint. Looking to do a full detail on my 997.1 and am wondering what the best combo would be. Going to start with a strip wash, and I am going to clay the car. Thereafter, I would like to give it the ultimate shine. Any suggestions? I want to go full tilt on this thing. I would like to layer as many products as much as possible to get the greatest, wettest shine possible. Link to comment Share on other sites More sharing options...
ACRCAR Posted November 3, 2016 Author Share Posted November 3, 2016 Like the title states, I am looking for the BEST Adams recipe for black paint. Looking to do a full detail on my 997.1 and am wondering what the best combo would be. Going to start with a strip wash, and I am going to clay the car. Thereafter, I would like to give it the ultimate shine. Any suggestions? I want to go full tilt on this thing. I would like to layer as many products as much as possible to get the greatest, wettest shine possible. Here is the actual car. Link to comment Share on other sites More sharing options...
shane@detailedreflections Posted November 3, 2016 Share Posted November 3, 2016 Here's my take... -Strip wash -Clay -Polish (least aggressive to most depending on the paint) -Glaze (or Sealant first) -Sealant (or Glaze second) -Two thin coats of wax -VRT all the trim and top...or you can go wild and ceramic coat the trim -Metal polish the exhaust tips -H2O Guard & Gloss the wheels & calipers -Tire shine -Glass cleaner -Glass sealant Put sunglasses on and admire your work. Chris@Adams 1 Link to comment Share on other sites More sharing options...
ACRCAR Posted November 3, 2016 Author Share Posted November 3, 2016 Here's my take... -Strip wash -Clay -Polish (least aggressive to most depending on the paint) -Glaze (or Sealant first) -Sealant (or Glaze second) -Two thin coats of wax -VRT all the trim and top...or you can go wild and ceramic coat the trim -Metal polish the exhaust tips -H2O Guard & Gloss the wheels & calipers -Tire shine -Glass cleaner -Glass sealant Put sunglasses on and admire your work. I was actually thinking of doing exactly what you just stated except for the H2O Guard & Gloss on the wheels and calipers. Didn't even think of using that on there. I typically use the Quick Sealant on the rims. Seems to work really well. Are there any other products I can layer in there after the polish, sealant, glaze and during the waxing phase? Thank you for the tip! Link to comment Share on other sites More sharing options...
shane@detailedreflections Posted November 3, 2016 Share Posted November 3, 2016 The H2O Guard & Gloss is a much easier application on the wheels I find. Spray on and wipe off with the wet towel, then buff dry. It has to be one of the fastest ways to seal your wheels. I've grown to prefer it over the quick sealant for wheels since you can see exactly where you've touched and haven't, and it seems to hold up a little better for me. Your mileage may vary. There isn't really a reason to layer in more products. And none come to mind. The sealant provides long lasting protection. The glaze is a great appearance enhancing product. And it's all locked in with two layers of wax (Patriot is my go to for my garage queen, Americana for all others but I haven't tried the new Americana yet). If you layer too many products in, you run the risk of getting a haze in your finish. Sometimes less really is more. Link to comment Share on other sites More sharing options...
ACRCAR Posted November 3, 2016 Author Share Posted November 3, 2016 The H2O Guard & Gloss is a much easier application on the wheels I find. Spray on and wipe off with the wet towel, then buff dry. It has to be one of the fastest ways to seal your wheels. I've grown to prefer it over the quick sealant for wheels since you can see exactly where you've touched and haven't, and it seems to hold up a little better for me. Your mileage may vary. There isn't really a reason to layer in more products. And none come to mind. The sealant provides long lasting protection. The glaze is a great appearance enhancing product. And it's all locked in with two layers of wax (Patriot is my go to for my garage queen, Americana for all others but I haven't tried the new Americana yet). If you layer too many products in, you run the risk of getting a haze in your finish. Sometimes less really is more. Good point. I think I'll stick with the recipe laid out above and try to H2O G&G on the wheels. Thanks again! Link to comment Share on other sites More sharing options...
Chris@Adams Posted November 3, 2016 Share Posted November 3, 2016 I was actually thinking of doing exactly what you just stated except for the H2O Guard & Gloss on the wheels and calipers. Didn't even think of using that on there. I typically use the Quick Sealant on the rims. Seems to work really well. Are there any other products I can layer in there after the polish, sealant, glaze and during the waxing phase? Thank you for the tip! If you still have QS I would indeed use it on your wheels! bjoeaull, BluedogGMC and Norton 3 Link to comment Share on other sites More sharing options...
ACRCAR Posted November 3, 2016 Author Share Posted November 3, 2016 After I polish, do I remove the polish prior to laying down the paint sealant? Do I remove the paint sealant before laying down the Glaze? Does everything get layered on top of everything else, or is it most beneficial to remove at certain stages and then carry on with the next product(s)? Link to comment Share on other sites More sharing options...
shane@detailedreflections Posted November 3, 2016 Share Posted November 3, 2016 Yes, you'll want to remove the residue before laying down the sealant. You can use the glaze before the sealant and then wipe it off. It'll help you save a step. If you use the glaze after the sealant, it needs to come off. So... - polish -glaze -sealant -wipe -wax Link to comment Share on other sites More sharing options...
Mariner Posted November 3, 2016 Share Posted November 3, 2016 If it were me, I'd give it a few days rest before applying anything over the top of Paint Sealant. The newer formula doesn't require a long time to cure, but it will hold it's own for a few days until your next wash. That's when I'd go to town with HGG and wax. Link to comment Share on other sites More sharing options...
mc2hill Posted November 3, 2016 Share Posted November 3, 2016 (edited) Here's my take... -Strip wash -Clay -Polish (least aggressive to most depending on the paint) Wipe down with Adam's Revive Hand Poish -Glaze (or Sealant first) -Sealant (or Glaze second) -Two thin coats of wax -VRT all the trim and top...or you can go wild and ceramic coat the trim -Metal polish the exhaust tips -H2O Guard & Gloss the wheels & calipers -Tire shine -Glass cleaner -Glass sealant Put sunglasses on and admire your work. If your are looking for the most you can get from the Adam's products I would add one more thing - Wipe the car down with Adam's Revive Hand Polish after the machine polish. It is chemical polish, not an abrasive polish, and does a great job at cleaning the paint before adding your LSP. Edited November 3, 2016 by mc2hill Mariner 1 Link to comment Share on other sites More sharing options...
mc2hill Posted November 3, 2016 Share Posted November 3, 2016 Also, be sure to cover that soft top while you are polishing. A plastic drop cloth should work. Link to comment Share on other sites More sharing options...
ocdrifter Posted November 4, 2016 Share Posted November 4, 2016 The H2O Guard & Gloss is a much easier application on the wheels I find. Spray on and wipe off with the wet towel, then buff dry. It has to be one of the fastest ways to seal your wheels. I've grown to prefer it over the quick sealant for wheels since you can see exactly where you've touched and haven't, and it seems to hold up a little better for me. Your mileage may vary. There isn't really a reason to layer in more products. And none come to mind. The sealant provides long lasting protection. The glaze is a great appearance enhancing product. And it's all locked in with two layers of wax (Patriot is my go to for my garage queen, Americana for all others but I haven't tried the new Americana yet). If you layer too many products in, you run the risk of getting a haze in your finish. Sometimes less really is more. You suggested to put VRT on a canvas top? I would not put VRT on that canvas top, you will need to go to your local Porsche dealer and buy their canvas cleaner and scrub the top with a soft horse hair brush and then put the Porsche canvas treatment to protect the membrane of the convertible. Link to comment Share on other sites More sharing options...
shane@detailedreflections Posted November 4, 2016 Share Posted November 4, 2016 I didn't realize they had their own cleaner and treatment for their tops. I stand corrected. Link to comment Share on other sites More sharing options...
Odds and Ends Posted November 4, 2016 Share Posted November 4, 2016 (edited) No need to go to the "stealership" to buy cleaning products. Get yourself some RaggTopp cleaner and spray protectant. You can get both items in a kit. I use it (and sell it) for all of my customer cars as well for both my 996 Cabrio and 968 Cabrio. Give me a ring or PM if you have questions on the top. Black is tough......once you get it polished and sealed, touch it as little as possible. For the "best" shine, I like two coats of LPS as a base, then you can simply maintain with HGG and every so often, hit it with a coat of wax or glaze as a top coat. But again, be careful how much you're rubbing on it. Having a couple of layers on there will help reduce swirls but not prevent them completely. It's black...... Edited November 4, 2016 by Odds and Ends Norton and mc2hill 2 Link to comment Share on other sites More sharing options...
ACRCAR Posted November 4, 2016 Author Share Posted November 4, 2016 No need to go to the "stealership" to buy cleaning products. Get yourself some RaggTopp cleaner and spray protectant. You can get both items in a kit. I use it (and sell it) for all of my customer cars as well for both my 996 Cabrio and 968 Cabrio. Give me a ring or PM if you have questions on the top. Black is tough......once you get it polished and sealed, touch it as little as possible. For the "best" shine, I like two coats of LPS as a base, then you can simply maintain with HGG and every so often, hit it with a coat of wax or glaze as a top coat. But again, be careful how much you're rubbing on it. Having a couple of layers on there will help reduce swirls but not prevent them completely. It's black...... I already cleaned and treated the top with RaggTopp cleaner and protectant. I would never put VRT on there. The rest of the car has been done. Now I just need to focus on the paint. Thanks for the tips and suggestions everyone. Link to comment Share on other sites More sharing options...
ACRCAR Posted November 5, 2016 Author Share Posted November 5, 2016 Ok so I just finished with a looong day of detailing. So far I did the following: Washed, Clayed, Polished (x2), VRT'd trim & LPS. Letting the car cure until tomorrow. My question is should I now go for Glaze and follow that up with a coat of Americana, or is the Americana a waste of time at this point? Link to comment Share on other sites More sharing options...
shane@detailedreflections Posted November 6, 2016 Share Posted November 6, 2016 Glaze and Americana to seal the glaze in. The glaze isn't a long lasting product. The Americana on the top will give you some nice depth and better shine. Link to comment Share on other sites More sharing options...
Beemer Posted November 6, 2016 Share Posted November 6, 2016 Americana is definitely NOT a waste of time. It looks fantastic! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now