Jump to content
Customer Service 866.965.0400

Chris@Adams

Administrators
 View Profile  See their activity

  • Posts

    23,782

  • Joined

  • Last visited

  • Days Won

    74

 Content Type 

Everything posted by Chris@Adams

  1. Chris@Adams
    Have you tried CS3 or Graphene Detail Spray? You can use the as a quick Detailer or as a drying aid. They will both add pop & help maintain your coating.
  2. Chris@Adams
    If you don’t care about the hydrophobic qualities of the Ceramic coating you can use the Americana. I personally wouldn’t, two different families one SI02 and the other carnauba.
  3. Chris@Adams
    Welcome to our forum!
  4. Chris@Adams
    If you apply the Americana over the Ceramic Coating, the wax will affect the hydrophobics of coating. So I wouldn't.
  5. Chris@Adams
    I would say you used too much product, any of the SI02 products will streak if you use too much. I would do a regular two bucket wash then see what you have, if you still see streaks go back over with DS and use a couple MF towels to wipe away.
  6. Chris@Adams
    Welcome to our forum!
  7. Chris@Adams
    I always wipe - level first with the Suede Micro Fiber towel then I wipe with a Utility Micro Fiber followed by a Single Soft Micro Fiber. Doing this seems to cut way down on high spots. Make sure you pay attention to all panel gaps. If you do miss a area and have a high spot use a small amount Ceramic Spray to go over the high spots. Hope this helps.
  8. Chris@Adams
    That is pretty cool!
  9. Chris@Adams
    I always had good luck using our TAR and a plastic razor blade. https://adamspolishes.com/products/adams-tar?_pos=1&_sid=c2cc113bf&_ss=r
  10. Chris@Adams
    Welcome Gian!
  11. Chris@Adams
    Welcome to our forum!
  12. Chris@Adams
    Welcome Paula!
  13. Chris@Adams
    Welcome to our forum! These wheel brushes do a great job on your barrels. https://adamspolishes.com/collections/exterior-wheel-tire-brushes
  14. Chris@Adams
    I wouldn't think that you could have burn through with the PC.
  15. Chris@Adams
    Did you use a machine or by hand?
  16. Chris@Adams
    TAR is a great choice, if you don't have any you can use also the top solvent (before shaking) of Brilliant Glaze.
  17. Chris@Adams
    The CS3 will help maintain your Graphene Spray Coating to make it even last longer.
  18. Chris@Adams
    Yes the first instructions said no need to level, but I thought they changed & updated the instructions. I wish you could have read my earlier post in this thread were I told everyone to always level to be on the safe side. Believe me I feel for you, at first I did the same thing with similar results.
  19. Chris@Adams
    Did you level the coating on your trim after applying same as your paint?
  20. Chris@Adams
    Welcome to our forum!
  21. Chris@Adams
    You can also use our Clay Mitt. https://adamspolishes.com/products/adam-s-clay-mitt
  22. Chris@Adams
    Welcome Phil!
  23. Chris@Adams
    Looking good Jack!
  24. Chris@Adams
    Welcome to our forum!
  25. Chris@Adams
    If the Water Spot Remover doesn't work you may have to Machine polish to remove them, it all really depends how long they have been on your paint. https://adamspolishes.com/products/adams-water-spot-remover
×
×
  • Create New...