James__

So many Pennsylvania events, so few in the Mid-West and South . Hopefully in years to come Adam's will have a higher operating budget for traveling to shows and can come to one I may actually be able to attend!

The Cummins Forum code was also for 10% so using the SHINEON code is a wash anyways!

Welcome to the forum! Some good looking truck you have! Is the square body static dropped or on bags?

Good looking rig! Any modification plans for it?

Welcome to the addiction, Justin. I highly recommend the H2O Guard and Gloss, It really makes these white RAMs pop! It also provides excellent protection. When you get a chance, post some pictures of the truck you will be shining up!

I use plastic totes that have a deep lip on the lid and that fasten securely to make sure that I don't get any critters or contaminants in my towels.

Welcome to the forum!

Welcome to the forum, let's see some pictures of your truck!

I will be moving to Fort Worth for work in a couple months and can attempt to help you out if you have not had an opportunity to correct the scratches by then. I have a PC polisher, full lineup of pads and polishes, Revive Hand Polish, and a Blue Hex Grip. Should be able to take care of the superficial damage with something that I already have my hands on.

Welcome to the forum! You came to the right place to keep your truck looking good!

Installed 3m 1080 gloss black vinyl on the b pillars of my truck and a heavier duty set of vent visors.

That's impressive! Very cool!

Installed my new Carli Suspension upper and lower control arms and track bar. Huge difference in the front end feel of my truck and now I have no clearance issues with my tires.

This is why dogs are a man's best friend

Welcome to the forum! Sounds like a great couple of cars, I would love to see some pictures! Also, it looks like the forum autocorrect changed the model of your mustangs in your previous post, it happens sometimes.

Will do! I don't know exactly when I plan on polishing them yet though. I need to pick up some precision tools and polishing wheels for my dremel and order a couple things first.

The picture on that item on the website is a little misleading... If you click on the item to go to it's specific web page, you are given a drop down list of 3 options: 1. 5 Gallon Bucket With 8" Round Sticker (No Gamma Seal Lid / No Grit Guard) - $10.99 2. 5 Gallon Bucket With 8" Round Sticker & Grit Guard (No Gamma Seal Lid) - $14.99 3. 5 Gallon Bucket With 8" Round Sticker, Grit Guard, & Gamma Seal Lid - $19.99 http://adamspolishes.com/shop/specials/sub-category-1/adam-s-new-detailing-bucket.html

I had this problem the first time I used H2O G&G. It happens when too much product is applied. It really doesn't take a lot of product especially once your wet application towel has a fair amount of residual product in it from previous panels.

Yeah, by hand. There really just isn't enough room to utilize my PC and I do not want to invest in another power tool for something that I will rarely do. Thanks for the advice, if I decide to continue past Paint Correcting Polish then I will use a blue hex grip to apply Paint Finishing Polish.

I don't believe that the impression tool is designed to hold the clay bar on its own. It is designed to give the clay geoimpressions and give you something to wrap the clay around, giving you a larger surface to hold on to. The clay will still rely on you holding it to the impression tool rather than hold itself to the tool.

If I am unable to reach my desired results on the painted portion of the wheels using the Revive, I plan to basically do a paint correction on them by hand using Paint Correction Polish and Paint Finishing Polish. I will order the Orange Hex Grip for the Correcting Polish if I go this route, but what is recommended to apply the Paint Finishing Polish? Should I order and additional Orange Hex Grip for it or get another yellow, red, or blue Hex Grip for the Paint Finishing Polish?

GoPro on the foam gun was sided unitedly a cool idea!

Hope all ends well and praying for a speedy recovery!

Welcome, Milt! Very slick truck! what size is the drop?

Incredible turnaround on the interior! And the exterior is looking good!