mbzamg32

Did a quick detail on my brothers truck:
Wash
Clay
Polish with MF and PCP
Polish with white foam and PFP
Apply Brilliant Glaze
LPS
Buttery wax
= AMAZING

LPS before Buttery. You might want to clay it first as well. When i bought my jeep didn't think it needed to be clayed but when I did the baggie test the surface was pretty rough.

Thanks for all the tips. Got my Americana kit and followed all the tips n suggestions in this post. Process went as follows:
PCP
PFP
Brilliant Glaze
LPS
Americana

Ok! Thanks! I'll still probably get the strip wash and see how it goes...

Ok! Thanks! I'll still probably get the strip wash and see how it goes...

Did you do one panel at a time? And for my experience I just used a little of the pcp with this product less is more. If it is getting hard to take out put some brilliant glaze on top and it should wipe away easily.

Did you do one panel at a time? And for my experience I just used a little of the pcp with this product less is more. If it is getting hard to take out put some brilliant glaze on top and it should wipe away easily.

That looks familiar, I like it

Thank to Zapdon for the idea...

Just recently purchased a Cyclo with one of the forum members (Big thanks to Mariner) and man is this machine AMAZING!!!
 
-Clean wheels and tires with wheel cleaner and tire and rubber cleaner for tires.
-Engine bay wash with APC
-Started off with a wash. Adams car shampoo and APC about 4-5 squirts in 2gal of water for a strip wash.
-Blow dry
-Decon'd with an Clay alternative using the Cyclo.
-Rinse
-Apply VRT on all rubber trim
NOW THE BIG EVENT!!!
-2 step correction using Microfiber pad with PCP then White foam with PFP.
-tried to get by just using the orange foam but my buddy was like now you can see the scratches easily coz its shiny!!! Using the MF pad eliminated all the swirls marks and light scratches. The difference was night and day. Even a little pressure on the Cyclo made a difference.
-Apply LPS let it cure for 20mins. Wipe off
-Apply Buttery wax let it sat for 20mins.bthen wipe off.
 
WOW!!!! I was impressed didn't think I would be able to eliminate swirl marks!!! And this was a first time to use a machine polisher.

Just recently purchased a Cyclo with one of the forum members (Big thanks to Mariner) and man is this machine AMAZING!!!
 
-Clean wheels and tires with wheel cleaner and tire and rubber cleaner for tires.
-Engine bay wash with APC
-Started off with a wash. Adams car shampoo and APC about 4-5 squirts in 2gal of water for a strip wash.
-Blow dry
-Decon'd with an Clay alternative using the Cyclo.
-Rinse
-Apply VRT on all rubber trim
NOW THE BIG EVENT!!!
-2 step correction using Microfiber pad with PCP then White foam with PFP.
-tried to get by just using the orange foam but my buddy was like now you can see the scratches easily coz its shiny!!! Using the MF pad eliminated all the swirls marks and light scratches. The difference was night and day. Even a little pressure on the Cyclo made a difference.
-Apply LPS let it cure for 20mins. Wipe off
-Apply Buttery wax let it sat for 20mins.bthen wipe off.
 
WOW!!!! I was impressed didn't think I would be able to eliminate swirl marks!!! And this was a first time to use a machine polisher.

Just recently purchased a Cyclo with one of the forum members (Big thanks to Mariner) and man is this machine AMAZING!!!
 
-Clean wheels and tires with wheel cleaner and tire and rubber cleaner for tires.
-Engine bay wash with APC
-Started off with a wash. Adams car shampoo and APC about 4-5 squirts in 2gal of water for a strip wash.
-Blow dry
-Decon'd with an Clay alternative using the Cyclo.
-Rinse
-Apply VRT on all rubber trim
NOW THE BIG EVENT!!!
-2 step correction using Microfiber pad with PCP then White foam with PFP.
-tried to get by just using the orange foam but my buddy was like now you can see the scratches easily coz its shiny!!! Using the MF pad eliminated all the swirls marks and light scratches. The difference was night and day. Even a little pressure on the Cyclo made a difference.
-Apply LPS let it cure for 20mins. Wipe off
-Apply Buttery wax let it sat for 20mins.bthen wipe off.
 
WOW!!!! I was impressed didn't think I would be able to eliminate swirl marks!!! And this was a first time to use a machine polisher.

I just got a cyclo with one of the forum members and im thinking about doing the 2 step correction on this car... But it looks like there is clear coat failure already. Any tips? Do you guys think this is clear coat failure? If it is what's the worst that could happen if i still go ahead and polish it? Besides a BIG waste of my time.

Finished product!! ????????????