Dan@Adams

Thanks Dan@Adams!  Now its time
to wear out the refresh button as well as my thumb until launch!!!!

Thank you Dan for taking the pictures and sharing them.  Hopefully next year all of us can attend some shows.

Today we officially hit 400,000 followers on Instagram! We're very honored and thank each and every one of you.

All I can say is COMING SOON, because I don't know when it will be launching:
 

 

Today we officially hit 400,000 followers on Instagram! We're very honored and thank each and every one of you.

All I can say is COMING SOON, because I don't know when it will be launching:
 

 

Pretty cool to note, that very last picture, Adam was the high bidder and is the happy new owner of that beautiful truck 😎

Continued:
 

 

 

 

 

 

 

 

 

Pretty cool to note, that very last picture, Adam was the high bidder and is the happy new owner of that beautiful truck 😎

Continued:
 

 

 

 

 

 

 

 

 

Hey everyone!

We just wrapped up another great event with Barrett-Jackson at WestWorld in Scottsdale, AZ! This was the first auction back after the Northeast, West Palm, and Las Vegas auctions were all cancelled earlier this year due to Covid-19 restrictions. The event went very well, with restrictions in place that it was not open to the public, only bidders, consignors, sponsors, and exhibitors. UV lighting and hand cleaning stations were plentiful, everyone entering the premises had a temperature check, and masks were 100% required by everyone in attendance.

I wanted to share some pictures I took throughout the event - some cool cars, some vehicles I helped to detail, and so on. 








 

 

 

 

 

 

Hey everyone!

We just wrapped up another great event with Barrett-Jackson at WestWorld in Scottsdale, AZ! This was the first auction back after the Northeast, West Palm, and Las Vegas auctions were all cancelled earlier this year due to Covid-19 restrictions. The event went very well, with restrictions in place that it was not open to the public, only bidders, consignors, sponsors, and exhibitors. UV lighting and hand cleaning stations were plentiful, everyone entering the premises had a temperature check, and masks were 100% required by everyone in attendance.

I wanted to share some pictures I took throughout the event - some cool cars, some vehicles I helped to detail, and so on. 








 

 

 

 

 

 

Continued:
 

 

 

 

 

 

 

 

 

Pretty cool to note, that very last picture, Adam was the high bidder and is the happy new owner of that beautiful truck 😎

Today we officially hit 400,000 followers on Instagram! We're very honored and thank each and every one of you.

All I can say is COMING SOON, because I don't know when it will be launching:
 

 

Pretty cool to note, that very last picture, Adam was the high bidder and is the happy new owner of that beautiful truck 😎

Hi Sven, and welcome to the forum! I've always been a fan of Avalanches and almost bought one, but ended up with a Trailblazer SS instead 

Do you have any pictures of the severity of the swirl marks? After washing and claying the vehicle, you would start with a small test area (about 18"x18") using our blue Adam's Compound with a Microfiber Cutting Pad or Blue Foam Pad, and then step down to our white Adam's Polish with a White Foam Pad. Once the swirl marks are out, then I would recommend our Ceramic Spray Coating for a very easy to apply protection product, with more durability and longevity than a wax. 

If you haven't already purchased the Porter Cable - it's a fine and dependable machine - I would recommend spending a little bit more on something like our Swirl Killer 15MM Polisher, especially if you plan on doing a few cars like you mentioned. The Swirl Killer has a long-throw random orbit pattern, which corrects better and faster while still being very safe on the paint. It will have less vibration and be easier on your hands, fingers, and forearms. The Porter Cable is a very solid machine that we used to sell, but there have been significant technology improvements over the last 10 years or so to make paint correction and polishing a less strenuous process. Depending on the backing plate diameter on the Porter Cable, you may need our 5.5" pads (5" backing plate) or 6.5" pads (6" backing plate). The Swirl Killer 15MM Polisher is on sale right now plus an extra 15% off, and it would use our 5.5" pads.

If you're looking for a complete compounding and polishing kit, I would recommend our Swirl Killer 15MM Two Step Kit. Keep in mind this kit is strictly compounding and polishing, so I would recommend our Fine Grade Clay Bar & Detail Spray Kit prior to machine polishing, and then the Ceramic Spray Coating Basic Kit for protection after.

Here are a few videos detailing all of the things I mentioned above:

Clay Bar and Machine Polishing:
 

Ceramic Spray Coating How-To:
 

Let us know if you have any other questions!

Then maintain it with this.  https://adamspolishes.com/collections/new-just-in/products/graphene-detail-spray™

Haha, cool thread idea! No french fries lately, but I pulled exactly $4.25 in change from underneath the seat, seat rail, and behind the driver seat of that black C5 Corvette I did recently...somebody must like the go pedal in that car!

Some great deals!
 
https://adamspolishes.com/collections/flash-sale
 

Yep, Nick's got it! We recommend 24 hours of cure time indoors away from any moisture or water exposure, then you can apply Ceramic Boost or Graphene Detail Spray. Then we would recommend maintaining with Ceramic Boost/Graphene Detail Spray/CS3 at least once a month.  

The vehicle can get wet (rain) after 24 hours, but like Nick mentioned, I usually tell customers to wait at least 5-7 days before washing the vehicle with soap. 

After 24hrs add boost.
 
Usually good measure to wait 7 days to wash

Any updates on how it turned out @liquidred? Were you able to fix the streaking?

As mentioned, I usually try Graphene Ceramic Spray Coating or Brilliant Glaze first. Apply either one and then wipe away immediately with a plush towel. If the coating has cured enough that those do not remove the streaking, then I will move up to our white Polish with a Blue Hex Grip Applicator and gently polish the area. If that does not remove the streaking, then I will try our blue Compound with a Blue Hex Grip Applicator. If none of those options work, you would need to machine polish the area, then prep and reapply the coating in that spot.

Thank you for clarifying!
 

The foundation of the graphene coating is the ceramic coating.  Then refined graphene oxide is added to the coating.  Think of it as another form of ceramic with the infusion of RGO.  
 
 
 

Any updates on how it turned out @liquidred? Were you able to fix the streaking?

As mentioned, I usually try Graphene Ceramic Spray Coating or Brilliant Glaze first. Apply either one and then wipe away immediately with a plush towel. If the coating has cured enough that those do not remove the streaking, then I will move up to our white Polish with a Blue Hex Grip Applicator and gently polish the area. If that does not remove the streaking, then I will try our blue Compound with a Blue Hex Grip Applicator. If none of those options work, you would need to machine polish the area, then prep and reapply the coating in that spot.

We just added this one to the website a little while ago and it's selling super fast. Only about 200 bottles remaining as I'm typing this!

Some shirt sizes and stickers have already sold out


 
CLICK HERE TO SHOP NOW!