BRZN

As the thread title states, The Chrysler Nationals will be held July 10-12 in Carlisle, PA.
 
https://www.carlisleevents.com/events/events-detail/index?id=chrysler+nationals&gclid=EAIaIQobChMIudXlr-qw6gIVkcDICh22_giuEAAYASAAEgLArPD_BwE
 
We'll be in our normal location at the end of the Midway in Row IE. You can't miss us, look for the large inflatable Detail Spray Bottle on top of our trailer. hope to see you there!
 
I should have two cases of the newly released Slick & Slide arriving sometime after my pallets of product. First come first served! I also have some products I'm letting go at 50% off! 

PPF on the entire front clip, all coated with Adam's 9H UV Ceramic Paint Coating.
 

PPF on the entire front clip, all coated with Adam's 9H UV Ceramic Paint Coating.
 

PPF on the entire front clip, all coated with Adam's 9H UV Ceramic Paint Coating.
 

The wheels on my '07 Dodge Magnum have been powder coated. I clean them with Wheel Cleaner with no issue.

The coating that's currently on the vehicle is going to have to be removed before the wrap goes on. The adhesive of the wrap will not stick to the coating.
 
Yes, you'll want the hood to cool down before trying to coat it. If it's a hot and sunny day, your going to want to make sure the trunk lid is cool too.
 
I'm not sure how the heat from the engine will effect the coating prior to being completely cured.
 
I Ceramic Coated the Clear Wrap on my '06 GTO this past winter, it was just like doing paint.

The wheels on my '07 Dodge Magnum have been powder coated. I clean them with Wheel Cleaner with no issue.

I've had VRT thin before, with no rhyme, nor reason. The product seemed to still work just fine for me. Sling is going to happen if any of the product is pooled in the outer tread blocks, just the same as Tire Shine.

Show wasn't bad, weather was real nice with just one brief storm after we'd closed on Friday evening. Perhaps a third less vendors in the midway, and I heard gate entries were down by about half. My guess; about 1/4, or a bit less wore masks once through the gates. Masks had to be worn to enter. Our sales numbers were pretty good, being above where they were in 2017 and there were no Sunday sales this year with it being Father's Day, so one day less for the Event. We tried our best to adhere to the CDC guidelines to keep ourselves, and our customers as safe as possible.
We set up differently to allow a better flow through our space, having the tables of product on the outsides, leaving the center for upright cabinets with plenty of room for Social Distancing. We limited the numbers of bottles of product per table.
 
All my Team Members wore masks

Notice a tube of disinfecting wipes at both cash boxes to keep the area wiped down and clean, as well as a bottle of Hand Sanitizer by Dan to be used between customers.
 
We had only one clearly marked way in

 
and one clearly marked way out

with every other possible way in roped off.
 
Social Distancing placards were throughout our store

 
The line to the point of sale registers was labeled at six foot intervals

 
Can't wait to be back for the Chrysler Nationals in early July!

Show wasn't bad, weather was real nice with just one brief storm after we'd closed on Friday evening. Perhaps a third less vendors in the midway, and I heard gate entries were down by about half. My guess; about 1/4, or a bit less wore masks once through the gates. Masks had to be worn to enter. Our sales numbers were pretty good, being above where they were in 2017 and there were no Sunday sales this year with it being Father's Day, so one day less for the Event. We tried our best to adhere to the CDC guidelines to keep ourselves, and our customers as safe as possible.
We set up differently to allow a better flow through our space, having the tables of product on the outsides, leaving the center for upright cabinets with plenty of room for Social Distancing. We limited the numbers of bottles of product per table.
 
All my Team Members wore masks

Notice a tube of disinfecting wipes at both cash boxes to keep the area wiped down and clean, as well as a bottle of Hand Sanitizer by Dan to be used between customers.
 
We had only one clearly marked way in

 
and one clearly marked way out

with every other possible way in roped off.
 
Social Distancing placards were throughout our store

 
The line to the point of sale registers was labeled at six foot intervals

 
Can't wait to be back for the Chrysler Nationals in early July!

Show wasn't bad, weather was real nice with just one brief storm after we'd closed on Friday evening. Perhaps a third less vendors in the midway, and I heard gate entries were down by about half. My guess; about 1/4, or a bit less wore masks once through the gates. Masks had to be worn to enter. Our sales numbers were pretty good, being above where they were in 2017 and there were no Sunday sales this year with it being Father's Day, so one day less for the Event. We tried our best to adhere to the CDC guidelines to keep ourselves, and our customers as safe as possible.
We set up differently to allow a better flow through our space, having the tables of product on the outsides, leaving the center for upright cabinets with plenty of room for Social Distancing. We limited the numbers of bottles of product per table.
 
All my Team Members wore masks

Notice a tube of disinfecting wipes at both cash boxes to keep the area wiped down and clean, as well as a bottle of Hand Sanitizer by Dan to be used between customers.
 
We had only one clearly marked way in

 
and one clearly marked way out

with every other possible way in roped off.
 
Social Distancing placards were throughout our store

 
The line to the point of sale registers was labeled at six foot intervals

 
Can't wait to be back for the Chrysler Nationals in early July!

Show wasn't bad, weather was real nice with just one brief storm after we'd closed on Friday evening. Perhaps a third less vendors in the midway, and I heard gate entries were down by about half. My guess; about 1/4, or a bit less wore masks once through the gates. Masks had to be worn to enter. Our sales numbers were pretty good, being above where they were in 2017 and there were no Sunday sales this year with it being Father's Day, so one day less for the Event. We tried our best to adhere to the CDC guidelines to keep ourselves, and our customers as safe as possible.
We set up differently to allow a better flow through our space, having the tables of product on the outsides, leaving the center for upright cabinets with plenty of room for Social Distancing. We limited the numbers of bottles of product per table.
 
All my Team Members wore masks

Notice a tube of disinfecting wipes at both cash boxes to keep the area wiped down and clean, as well as a bottle of Hand Sanitizer by Dan to be used between customers.
 
We had only one clearly marked way in

 
and one clearly marked way out

with every other possible way in roped off.
 
Social Distancing placards were throughout our store

 
The line to the point of sale registers was labeled at six foot intervals

 
Can't wait to be back for the Chrysler Nationals in early July!

Show wasn't bad, weather was real nice with just one brief storm after we'd closed on Friday evening. Perhaps a third less vendors in the midway, and I heard gate entries were down by about half. My guess; about 1/4, or a bit less wore masks once through the gates. Masks had to be worn to enter. Our sales numbers were pretty good, being above where they were in 2017 and there were no Sunday sales this year with it being Father's Day, so one day less for the Event. We tried our best to adhere to the CDC guidelines to keep ourselves, and our customers as safe as possible.
We set up differently to allow a better flow through our space, having the tables of product on the outsides, leaving the center for upright cabinets with plenty of room for Social Distancing. We limited the numbers of bottles of product per table.
 
All my Team Members wore masks

Notice a tube of disinfecting wipes at both cash boxes to keep the area wiped down and clean, as well as a bottle of Hand Sanitizer by Dan to be used between customers.
 
We had only one clearly marked way in

 
and one clearly marked way out

with every other possible way in roped off.
 
Social Distancing placards were throughout our store

 
The line to the point of sale registers was labeled at six foot intervals

 
Can't wait to be back for the Chrysler Nationals in early July!

So far what I’ve seen since arriving yesterday. 
On most every pole


At Vendor Services outside Gate 3


In the Midway road


Inside Gate 3


I got my Team our own Portable Toilet

So far what I’ve seen since arriving yesterday. 
On most every pole


At Vendor Services outside Gate 3


In the Midway road


Inside Gate 3


I got my Team our own Portable Toilet

So far what I’ve seen since arriving yesterday. 
On most every pole


At Vendor Services outside Gate 3


In the Midway road


Inside Gate 3


I got my Team our own Portable Toilet

Never noticed their Event Magazine online before:
 
https://carlisleevents.com/docs/default-source/guides/2020-spring-carlisle.pdf

I'll mirror what will be happening on the webstore for any sales or specials. I do have some product from last year I'm marking down 50%; see my first post up top.

I'll mirror what will be happening on the webstore for any sales or specials. I do have some product from last year I'm marking down 50%; see my first post up top.

Never noticed their Event Magazine online before:
 
https://carlisleevents.com/docs/default-source/guides/2020-spring-carlisle.pdf

Good work Chris!
 

Our Carpet & Upholstery Cleaner is Sodium based. What you're seeing could be some of the sodium residue. Take a Terry Cloth Towel, get it wet with warm, clear water, wring it out and dab the spots with the towel, that may be all the more you'll need to do to remove the spots.
 
I've had a car with cloth seats so dirty, dirt was continually being pulled up leaving similar white spots. I tried an extraction machine, and a steamer; both several times with no luck. I finally resorted to using a tamping brush and our Multi-Use Foaming Cleaner with the extraction machine to get them perfect.

Thought I'd post this picture to hopefully generate some additional interest in the #88 Alex Bowman Adam's Polishes Chevrolet Camaro ZL1 Car Car Kit. As an employee of Hendrick Motorsports we are very excited about our new relationship with Adam's Polishes and ChevyGoods.com. Personally, I have been using various Adam's Polishes products  for a few years now, so this was especially cool to me!
 
Unfortunately, before you ask, this hood is not available for sale. It has been "claimed" by our marketing group. So, it most likely will be provided directly to Adam's Polishes. Anyway, this is the actual hood from the car raced at Bristol.....
 

We'll be in our usual location on the Midway; the end of Row IE in spaces 123-130
 
Cumberland County will be in the Green, come on out!

We'll be in our usual location on the Midway; the end of Row IE in spaces 123-130
 
Cumberland County will be in the Green, come on out!